| reply to nate1234
Re: Ubee (Ambit) U10C035 Modem screenshots great... now comcast only has ubee modems 
I hope the tech can find a DPC3000 or SB6120 (hopefully the DPC3000) |
|
 CjaicemanPremium,MVM
join:2004-10-12
Parker, CO
kudos:2
 ·Comcast Business..
| said by nate1234:great... now comcast only has ubee modems I hope the tech can find a DPC3000 or SB6120 (hopefully the DPC3000) The only issues I've had with my SB6120 were Comcast's problems, not the modem directly. Examples would be yesterday, they pushed a new firmware, which worked fine, but changed the config file they were sending to the modem so it had the wrong speeds. The modem wasn't at fault, it was just doing what it was being told to do.
--
Duct tape is like The Force – it has a light side and a dark side, and it binds the Universe together |
|
| no, it is definitely a problem with the modem. Ubee confirms, the newest FW conflicts with Arris C4 CMTS's. The old firmware is being sent out, and my speeds are now worse. |
|
|
|
CjaicemanPremium,MVM
join:2004-10-12
Parker, CO
kudos:2 Reviews:
·Comcast Business..
| I haven't used an Ubee modem, so I don't know. I was just pointing out that not all SB6120's are having issues that are related to the modem. Even the non-D3 ambit modems are pretty junky though, I have seen my fair share of issues with them when servicing clients.
--
Duct tape is like The Force – it has a light side and a dark side, and it binds the Universe together |
|
| oh, ok. Well my speeds are back up to what they should be (well, not upload speed. That is still on QPSK and at 2.560 Msym/sec). I am still hoping for a DPC3000 |
|
hata28
join:2008-12-16
Philadelphia, PA | reply to nate1234
said by nate1234:great... now comcast only has ubee modems I hope the tech can find a DPC3000 or SB6120 (hopefully the DPC3000) Hey Nate,
Comcast has this new modem Arris Touchstone TM702G
I just got it installed this morning.....so i don't have to have 2 modems for phone and HSI. And the speed:
 |
|
| Nice, I am seeing ~the same speeds with the Ubee now |
|
hata28
join:2008-12-16
Philadelphia, PA
1 edit | Arris Touchstone TM702G Screen shot The Upstream still shown as DOCSIS 2.0, but the download speed from RS is around 4 MB/s and I love the new upload speed. |
|
hata28
join:2008-12-16
Philadelphia, PA | Is this normal for the Upstream as Docsis 2.0 or am I still on DOCSIS 2.0 |
|
| Comcast is only doing docsis 3.0 download channel bonding now. it is normal. |
|
andyrossPremium,MVM
join:2003-05-04
Schaumburg, IL | reply to hata28
said by hata28:Is this normal for the Upstream as Docsis 2.0 or am I still on DOCSIS 2.0 The specs for upstream channel bonding have not been finalized and released yet. |
|
| reply to Cjaiceman
Re: Ubee (Ambit) U10C035 Modem screenshots I have the same thing with the new firmware and the wrong config.
Tech had me on the phone for 20 minutes just now and he can not get it to accept the ultra config
He said he would call back in a hour.
Sounds like the run around to me.
said by Cjaiceman:The only issues I've had with my SB6120 were Comcast's problems, not the modem directly. Examples would be yesterday, they pushed a new firmware, which worked fine, but changed the config file they were sending to the modem so it had the wrong speeds. The modem wasn't at fault, it was just doing what it was being told to do. |
|
CjaicemanPremium,MVM
join:2004-10-12
Parker, CO
kudos:2 Reviews:
·Comcast Business..
| My issue was the config file had been edited on their end and was set to 3300/256 (YUCK!), their NOC got it figured out and dropped the right file on my local TFTP server, rebooted the modem and it was fixed. This is a different issue that your seeing. Sounds more like what n0xlf  was seeing.
--
Duct tape is like The Force – it has a light side and a dark side, and it binds the Universe together |
|
| reply to kenshell
Reboot it, they rolled back the firmware, then call back. |
|
Reviews:
·Comcast
| said by nate1234:Reboot it, they rolled back the firmware, then call back. Thanx Nate for the info...I rebooted and got the rolled back firmware.. The newer firmware wasn't very good...
My area isn't D3 yet , but I was only getting about 10/2 on my Blast 16/2. Back to normal now. |
|
| ok, nice! |
|
 EGThe wings of lovePremium
join:2006-11-18
Union, NJ
kudos:9 | reply to hata28
Re: Arris Touchstone TM702G Screen shot W.I.W., the system is providing only 3 bonded DS channels.. |
|
hata28
join:2008-12-16
Philadelphia, PA | Is there a way to have all 4 bonded? |
|
| not until comast is ready. At that point everyone (maybe) will see 4 bonded channels |
|
hata28
join:2008-12-16
Philadelphia, PA
1 edit | so u mean...other modem sees 4 but it's actually 3 bonded! |
|
