http://www.dslreports.com/forum/netopia-need-config-help-please-33470210ENT-22721718 en Sat, 11 Feb 2012 12:33:45 EDT Sat, 11 Feb 2012 12:33:45 EDT http://www.dslreports.com/forum/Re-netopia-need-config-help-please-33470210ENT-22732958
For what it's worth, I had my old 3546 alongside when I was trying to config this one; it was basically not much help.]]> http://www.dslreports.com/forum/Re-netopia-need-config-help-please-33470210ENT-22732958 Sun, 19 Jul 2009 12:49:24 EDT http://www.dslreports.com/forum/Re-netopia-need-config-help-please-33470210ENT-22732854 said by matt_d:

My links are for enterprise firmware; there is no web interface on the business class devices and the configuration process is quite different.
But the values are the same.]]> http://www.dslreports.com/forum/Re-netopia-need-config-help-please-33470210ENT-22732854 Sun, 19 Jul 2009 12:11:57 EDT http://www.dslreports.com/forum/Re-netopia-need-config-help-please-33470210ENT-22732694 http://www.dslreports.com/forum/Re-netopia-need-config-help-please-33470210ENT-22732694 Sun, 19 Jul 2009 11:20:04 EDT http://www.dslreports.com/forum/Re-netopia-need-config-help-please-33470210ENT-22732099 said by matt_d:

There are two documents to reference; neither are present on the Netopia site, they are linked off of the motorola pages.
What is wrong with this one?
»www.netopia.com/support/hardware···042.html]]> http://www.dslreports.com/forum/Re-netopia-need-config-help-please-33470210ENT-22732099 Sun, 19 Jul 2009 05:32:21 EDT http://www.dslreports.com/forum/Re-netopia-need-config-help-please-33470210ENT-22729872
There are two documents to reference; neither are present on the Netopia site, they are linked off of the motorola pages.

This first one tells you how to setup the unit assuming your are using NAT; but it also contains the AT&T specific configuration parameters:
»broadband.custhelp.com/cgi-bin/b···ndefined

This second one:
»broadband.custhelp.com/cgi-bin/b···46289049

.. will apply to you if you use sticky IPs; it describes the differences. Generally, I'd suggest you read the first one, and if you have sticky IPs, read the second one. Hope this helps.

- Matt]]> http://www.dslreports.com/forum/Re-netopia-need-config-help-please-33470210ENT-22729872 Sat, 18 Jul 2009 15:45:52 EDT http://www.dslreports.com/forum/Re-netopia-need-config-help-please-33470210ENT-22728012
I can tell you that on the 3346N-002, many of the WAN options were fine at the factory-defaults settings. Not sure how this applies to the 3347-ENT, however. ]]> http://www.dslreports.com/forum/Re-netopia-need-config-help-please-33470210ENT-22728012 Sat, 18 Jul 2009 03:36:46 EDT http://www.dslreports.com/forum/Re-netopia-need-config-help-please-33470210ENT-22723260 http://www.dslreports.com/forum/Re-netopia-need-config-help-please-33470210ENT-22723260 Fri, 17 Jul 2009 11:18:38 EDT http://www.dslreports.com/forum/Re-netopia-need-config-help-please-33470210ENT-22722103 www.netopia.com/support/hardware···ent.html]]> http://www.dslreports.com/forum/Re-netopia-need-config-help-please-33470210ENT-22722103 Fri, 17 Jul 2009 06:41:45 EDT http://www.dslreports.com/forum/netopia-need-config-help-please-33470210ENT-22721718
I have an R910 router as well, so I'm familiar with the telnet interface, but I sure can't figure out the ADSL configuration -- the basic stuff I know, but some of the more discrete options, I don't have a clue...

I have the pro service with 5 sticky IPs. I pretty much use the 3546 as nothing more than a router, I have NAT switched off on it.

So, I'm going to beg forgiveness here, and hope someone out there is willing to help someone in the old Pac Bell world in san jose -- if anyone has step by step to configure this thing (walking through the easy setup screens) it would be most appreciated.

Thx, Matt.]]> http://www.dslreports.com/forum/netopia-need-config-help-please-33470210ENT-22721718 Fri, 17 Jul 2009 01:51:11 EDT