http://www.dslreports.com/forum/r22727305 en Wed, 10 Feb 2010 02:23:20 EDT Wed, 10 Feb 2010 02:23:20 EDT http://www.dslreports.com/forum/remark,22729327 birdfeedr : 2) Pass-through is not affected by power on or off.

ONT coax -> (NIM-100 Cable-In) / (NIM-100 Cable-Out) -> coax -> DCT-700

I was using the NIM-100 to connect the Slingbox to the router. It took me a little while to run an ethernet connection down to the Slingbox, so I could turn off the NIM-100 and verify I was still slinging video.

I'm not sure how to report insertion loss value.]]> http://www.dslreports.com/forum/remark,22729327 Sat, 18 Jul 2009 13:14:22 EDT http://www.dslreports.com/forum/remark,22729111 rocky01 : Great question but always surprised when likes of More Fiber or Birdfeeder and a few others ask rather than field the questions :)]]> http://www.dslreports.com/forum/remark,22729111 Sat, 18 Jul 2009 12:27:27 EDT http://www.dslreports.com/forum/remark,22727305 More Fiber : A couple of questions came up in another forum regarding the pass-through capability of the NIM-100 that I have not been able to find the answer to.

1) When using the RF pass-through connection (RF-IN to RF-OUT) on the NIM-100, what is the insertion loss?
And yes, I know the insertion loss for MOCA signals is 100% :)

2) If the NIM-100 were to lose power, is the pass-through connection affected?

]]> http://www.dslreports.com/forum/remark,22727305 Fri, 17 Jul 2009 22:52:52 EDT