said by D Smoke 
:yea I had this problem too, I had to get help over at the jp1 forum which luckly they helped me! I forgot to post it here, so here it is
I know I was not the only one looking for this. Since I couldn't find an answer I had to head over to the JP1 forums (they make the remotes) and found some very nice helpful people. I would like to thank vickyg2003 a forum regular over at JP1 Remotes as well as Rob for directing me to the forums.
1)Select Aux
2) Hold setup 2 flashes
3) type 01376 2 flashes
1) select Aux button
2) Hold SETUP, 2 flashes
3) Type 994, 2 flashes
4) Tap SETUP
4) Enter the EFC 00173
5) Tap the button to be programmed [Cbl][triangle], 2 flashes
Make sure on step 5 you hit cbl button first before triangle. Again all credit goes to vicky over at JP1. Here is the original post
»
www.hifi-remote.com/forums/viewt···?p=77726Please register over there and give thanks if you have time! I just wanted to post it here since I didn't even know who made the comcast remotes before I started looking around cause I couldn't get skip to work. I can confirm this is working.
The only issue I had with D Smoke's fix on my Motorola DCX3400 with the new "bronze" Comcast remote was that by reprogramming the Aux button to control the Moto, the following issue arose. When I turn on the equipment using the "All On" button on the remote, it would:
·
