 koshoka
join:2006-12-01
Pottsville, PA | reply to DrumAt5280
Re: My Vonage Cuts in/out on upstream on Comcast Looks like an outside plant issue. Like beachintech said, the levels are screwy. I'd guess it was a bad tap/plate. |
|
| I couldn't figure out how to make it pingable but I did the test anyway. Perhaps there is some info in there of value. |
|
|
|
1 edit | Everything appears to be in order as far as Ping goes.
try this: »myspeed.visualware.com/voip/ |
|
1 edit | here are the results from that test:
»mcsiad.visualware.com/myspeed/db···d=720580 |
|
veldy
join:1999-08-04
Minneapolis, MN | reply to koshoka
said by koshoka:Looks like an outside plant issue. Like beachintech said, the levels are screwy. I'd guess it was a bad tap/plate. Uploads were causing a problem for me for a while, and it turned out to be an amplifier down the block a way; it wasn't tuning well and staying in band so there was a bit of interference. I had a problem where my modem was rebooting often [at first every couple of days, but later several times per day ... SB6120 latest firmware]. The issue was finally determined to be a combination of the bad amplifier and the jack they put in where the cable comes into the office from outside of the house. |
|
