<?xml version="1.0" encoding="UTF-8"?>

<rss version="2.0" xmlns:blogChannel="http://backend.userland.com/blogChannelModule">

<channel>
<title>Topic &#x27;98% Loss??&#x27; in forum &#x27;Site Tools&#x27; - dslreports.com</title>
<link>http://www.dslreports.com/forum/98-Loss-22809287</link>
<description></description>
<language>en</language>
<pubDate>Fri, 10 Feb 2012 19:13:58 EDT</pubDate>
<lastBuildDate>Fri, 10 Feb 2012 19:13:58 EDT</lastBuildDate>

<item>
<title>Re: 98% Loss??</title>
<link>http://www.dslreports.com/forum/Re-98-Loss-22831160</link>
<description><![CDATA[shermc77 posted : Thank you for your response. I'm interpreting the "90% loss" reported as due to the non-response from the 3rd and 4th hops shown on the lower half of the page. It's like it's needing a response from every hop to show that things are okay. If this is true, the testing logic could be improved to treat no response from pinging a hop as a separate case or just ignoring it if hops farther down the link are working okay.<br>I think you are right--our circuit is okay.]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/Re-98-Loss-22831160</guid>
<pubDate>Fri, 07 Aug 2009 13:17:26 EDT</pubDate>
</item>

<item>
<title>Re: 98% Loss??</title>
<link>http://www.dslreports.com/forum/Re-98-Loss-22817611</link>
<description><![CDATA[Rxdoxx posted : 100% means that the router is set not to respond to pings, so looking at the lines, they are ok.<br><br>Truthfully, I don't know why that 90% is showing in the upper part, but I wouldn't worry, the lines to you look fine.<br><br>Didn't like the gap between the best/worst ping at your address, but that is just me, it should be fine, seen a ton of others with a much higher worst.  Having the ping gap close/tight just shows a better consistency for tighter tweaking, but not a big thing, you're ok.<br><small>--<br>Was a Cruise Fanatic, one cruise on Princess cured me. Bleah</small>]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/Re-98-Loss-22817611</guid>
<pubDate>Wed, 05 Aug 2009 06:13:11 EDT</pubDate>
</item>

<item>
<title>98% Loss??</title>
<link>http://www.dslreports.com/forum/98-Loss-22809287</link>
<description><![CDATA[shermc77 posted : I'm having some speed issues on my network. When I run ping from the Internet to my server, it shows 0% loss, even with 1472-byte packets. When I ran the Line Quality test, it shows a very high (90%) loss. &raquo;<A HREF="/linequality/nil/2549688">/linequality/nil/2549688</A><br>I read the info I could find about how to interpret the test results, but I'm still very worried that there is something wrong. How should I proceed from here??<br><small>--<br>Thanks, ShermC77</small>]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/98-Loss-22809287</guid>
<pubDate>Mon, 03 Aug 2009 18:19:44 EDT</pubDate>
</item>

</channel>
</rss>

