mel2000
join:2008-03-05
Chicago, IL
| Why does Voicestick work on softphone but not IP phone?
I can send and receive calls fine using my Voicestick SIP credentials with the PhonerLite softphone. But when I enter those same credentials into my Dlink DPH-541 WiFi phone, my outbound calls get an immediate busy signal, and my inbound go straight to voicemail. Can someone explain why those SIP devices would give different results using the same credentials? My Voicestick SIP profile follows:
SIP Account Name: VoiceStick
Phone Number: 1773xxxxxxx
Authentication ID: 1773xxxxxxx
Authentication Password: mypassword
SIP Domain: i2telecom.com
Proxy Address: 72.5.80.155
Outbound Address: leave blank
Local Port: 5060
Register Timer(sec): 3600
Codec: Auto
Pkt Time(ms): Default
OutofBand DTMF: On |
|
mel2000
join:2008-03-05
Chicago, IL | I forgot to mention that I tested the DPH-541 with my Gizmo5 SIP credentials and was able to send and receive calls flawlessly. |
|
mel2000
join:2008-03-05
Chicago, IL
| reply to mel2000
After some research I found that by setting 72.5.80.116 as the Outbound Proxy Address I could receive inbound calls and make outbound calls just like the softphone. However, I still don't understand how the softphone was able to work properly without the Outbound Proxy Address. In fact, there isn't even a field to set that value in PhonerLite. Anyway I consider this problem solved. |
|
