McSummationMmmm, Zeebas Are Tastee.Premium,MVM
Fort Worth, TX
|reply to OutOfMem |
Re: [XPPro] Cannot access 2nd partition on USB drive
Well, linux isn't all that fussy. However, winders has the funny idea that there should only be one primary active on a "drive" at a time. Sometimes it works, sometimes it doesn't.
I reconfigured my stick so that the 2nd partition is a logical within an extended. Actually, it's technically like this:
Error message in Disk Management
Partition 1, Primary, FAT32, 256 MB
Partition 2, Extended
Partition 3, Unused
Partition 4, Unused
Partition 5, Logical, FAT32, 700 MB (within Extended Partition 2)
However, the same issue still arises in Windows XP. Only the 1st partition is displayed under My Computer, and when I check in Control Panel > Administrative Tools > Computer Management > Disk Management, I can see the 2nd partition is once again unassigned. When I try to assign to it a drive letter, I get the same error message. (See the above attachment.) Even after rebooting the computer with the stick still plugged in, the same problem occurs.
I do not have access to a Windows Vista system at the moment, so I am not sure if this is only a problem with XP, or if it will give me the same issue with Vista.
What confuses me is that on an internal SATA or PATA drive, no matter what combination of primary, extended, and logical partitions I use, Windows XP is able to read them and access them just fine. Why would this be any different than partitioning an external USB hard drive or a flash drive?
CampaignForLiberty.com Educate yourself. (And enable scripts...)