[Unstable] 500MHz FSB and Ethernet quits working? in Overclocking/Modding http://www.dslreports.com/forum/r23029629 en Wed, 10 Feb 2010 02:45:47 EDT Wed, 10 Feb 2010 02:45:47 EDT Re: [Unstable] 500MHz FSB and Ethernet quits working? http://www.dslreports.com/forum/remark,23241168 epoxy404 : this thread is kind of old but ctrl + F1 in bios will give you advanced options which should let you lock the pci-e. I'm supprised that it even posted at 500mhz as 400mhz is a stretch for G31 chipsets.]]> http://www.dslreports.com/forum/remark,23241168 Mon, 26 Oct 2009 00:43:45 EDT Re: [Unstable] 500MHz FSB and Ethernet quits working? http://www.dslreports.com/forum/remark,23084627 AllYourBase : Try lowering the FSB. It should be fine again.

Tho this never happen to me.]]> http://www.dslreports.com/forum/remark,23084627 Fri, 25 Sep 2009 21:19:35 EDT Re: [Unstable] 500MHz FSB and Ethernet quits working? http://www.dslreports.com/forum/remark,23062049 whymeintrouble :
said by salzan See Profile :

I've had really bad luck with OC and onboard NICs.

Try a PCI NIC if you have one.
i have heard and seent this as well, definitely pci or pci-ex NIC should fix the problem :)]]> http://www.dslreports.com/forum/remark,23062049 Tue, 22 Sep 2009 01:37:12 EDT Re: [Unstable] 500MHz FSB and Ethernet quits working? http://www.dslreports.com/forum/remark,23060153 salzan : I've had really bad luck with OC and onboard NICs.

Try a PCI NIC if you have one.]]> http://www.dslreports.com/forum/remark,23060153 Mon, 21 Sep 2009 18:06:26 EDT Re: [Unstable] 500MHz FSB and Ethernet quits working? http://www.dslreports.com/forum/remark,23031025 Ray422 : -Auto setting usually equals 100mhz
-Is this a new system? Did you install the ethernet drivers from your mobo disk ?
-Older system? Re-install from driver disk?

Only ideas I have.
--
Things I like - Team Discovery - Quads©3.3 to 4.0ghz - Strawberry Ice cream

]]> http://www.dslreports.com/forum/remark,23031025 Wed, 16 Sep 2009 03:29:40 EDT [Unstable] 500MHz FSB and Ethernet quits working? http://www.dslreports.com/forum/remark,23029629 Digital : I am running a G31M-ES2L with Crucial Ballistix DDR2-800 and the ethernet won't get a link (doesn't even show up in hardware manager) when I run the RAM at 500MHz /2.0v /6x multi for 3.0GHz (E8200)

Any suggestions? I am thinking it has something to do with the PCI-X bus, but I don't see anywhere to lock it at 100MHz. Any ideas?
--
Cædite eos. Novit enim Dominus qui sunt eius.]]> http://www.dslreports.com/forum/remark,23029629 Tue, 15 Sep 2009 20:57:49 EDT