<?xml version="1.0" encoding="UTF-8"?>

<rss version="2.0" xmlns:blogChannel="http://backend.userland.com/blogChannelModule">

<channel>
<title>Topic &#x27;Smartview&#x27; in forum &#x27;Sprint Mobile Broadband&#x27; - dslreports.com</title>
<link>http://www.dslreports.com/forum/Smartview-23083448</link>
<description></description>
<language>en</language>
<pubDate>Sat, 11 Feb 2012 07:21:59 EDT</pubDate>
<lastBuildDate>Sat, 11 Feb 2012 07:21:59 EDT</lastBuildDate>

<item>
<title>Re: Smartview</title>
<link>http://www.dslreports.com/forum/Re-Smartview-23468646</link>
<description><![CDATA[Jim_in_VA posted : hey great, glad that fixed it for'ya]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/Re-Smartview-23468646</guid>
<pubDate>Thu, 10 Dec 2009 12:43:40 EDT</pubDate>
</item>

<item>
<title>Re: Smartview</title>
<link>http://www.dslreports.com/forum/Re-Smartview-23461292</link>
<description><![CDATA[Lestat077 posted : Just wanted to say Thank you Jim for giving us link to Watcher and letting us know about Watcher. Back when I 1st got 3g few yrs ago I use a can and had old smartview that let me choose evdo only. worked good, years later I bought a amp and yagi and had update to new smartview  and my evdo has been crap  cause couldnt select evdo only. Jumps from rev A to 1xrtt all the time. As I am a hevy gamer this is horrible. Been asking for years why no one had made a software that allows you to choose evdo only. Found this link last night and every sense I have installed Watcher 1xrtt has not popped up once and my ping in games are staying great.  So anyone having problems with Evdo switching to 1xrtt while your doing some hevy use and its ends up staying in 1xrtt till you disconnect, This is your meal ticket to great evdo service and say goodbye to 1xrtt. Thanks again Jim ]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/Re-Smartview-23461292</guid>
<pubDate>Wed, 09 Dec 2009 09:21:31 EDT</pubDate>
</item>

<item>
<title>Re: Smartview</title>
<link>http://www.dslreports.com/forum/Re-Smartview-23297650</link>
<description><![CDATA[Jim_in_VA posted : useful only to set Sierra modems into EVDO Only mode - which current versions of SmartView cannot.<br><br>With a Cradlepoint you pretty much have a full range of data regarding the modem (signal/RSSI, HA settings, bandwidth used).<br><br>This signal strength data is NOT supported for Franklin CDU680 or Pantech UM175 devices using a Cradlepoint ... unfortunately. <br><small>--<br> ... need help?  &raquo;<A HREF="http://evdo-tips.com/" >evdo-tips.com/</A></small>]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/Re-Smartview-23297650</guid>
<pubDate>Thu, 05 Nov 2009 16:34:18 EDT</pubDate>
</item>

<item>
<title>Re: Smartview</title>
<link>http://www.dslreports.com/forum/Re-Smartview-23268624</link>
<description><![CDATA[caribconsult posted : Will do.  I'll load it onto my laptop, since that's the unit that uses the Sierra as a USB device.  The rest ot the time, which is most of the time, it's in a router so I suppose the Watcher program would be useless under those conditions, or is it?<br><small>--<br>Sierra 598U/Cradlepoint CTR500, grid antenna, Millenicom unlimited, 2 LinkSys WiFi a/p, 4 XPPro and 1 Ubuntu units, FireFox everywhere.</small>]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/Re-Smartview-23268624</guid>
<pubDate>Fri, 30 Oct 2009 21:04:17 EDT</pubDate>
</item>

<item>
<title>Re: Smartview</title>
<link>http://www.dslreports.com/forum/Re-Smartview-23239235</link>
<description><![CDATA[Jim_in_VA posted : Hey Jeff, you may want to try "Watcher" from Sierra with that 598 you use. Nice config options. See it on my website.<br><small>--<br> ... need help?  &raquo;<A HREF="http://evdo-tips.com/" >evdo-tips.com/</A></small>]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/Re-Smartview-23239235</guid>
<pubDate>Sun, 25 Oct 2009 15:44:38 EDT</pubDate>
</item>

<item>
<title>Re: Smartview</title>
<link>http://www.dslreports.com/forum/Re-Smartview-23236743</link>
<description><![CDATA[caribconsult posted : Sprint Smartview is for Sierra devices only, I believe.  The CDU has its own connection manager, as do most EVDO devices, and you MUST use the correct matching software for your device. If you change devices, be sure to uninstall the software for the old device FIRST, then plug in the new device and it should install its own software.<br><small>--<br>Sierra 598U/Cradlepoint CTR500, grid antenna, Millenicom unlimited, 2 LinkSys WiFi a/p, 4 XPPro and 1 Ubuntu units, FireFox everywhere.</small>]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/Re-Smartview-23236743</guid>
<pubDate>Sat, 24 Oct 2009 20:49:51 EDT</pubDate>
</item>

<item>
<title>Re: Smartview</title>
<link>http://www.dslreports.com/forum/Re-Smartview-23094778</link>
<description><![CDATA[Belinrahs posted : Generally if the aircard comes with software/has software made for it, it's best to use that. For example, the Franklin CDU-680 that I use comes with Franklin Connection Manager; it works great through that, however Sprint SmartView doesn't work one bit with it.<br><small>--<br>Sprint MBB thru Millenicom Unlimited service - Franklin CDU-680 (with 32" omni) connected to a CTR-350; Linksys WRT-54G running DD-WRT in repeater mode one room away to cover the whole house in Wi-Fi.</small>]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/Re-Smartview-23094778</guid>
<pubDate>Mon, 28 Sep 2009 11:48:46 EDT</pubDate>
</item>

<item>
<title>Re: Smartview</title>
<link>http://www.dslreports.com/forum/Re-Smartview-23083468</link>
<description><![CDATA[Burnerski posted : It's called the" Novatel connection manager for Windows".<br><br>Regards,<br>Danny]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/Re-Smartview-23083468</guid>
<pubDate>Fri, 25 Sep 2009 16:43:31 EDT</pubDate>
</item>

<item>
<title>Smartview</title>
<link>http://www.dslreports.com/forum/Smartview-23083448</link>
<description><![CDATA[Burnerski posted : I'm on my fourth modem and 3rd antenna a parabolic grid. I have been having lots of disconnects or switching to 1rtt towers for no reason. I suspected sprint smartview. I currently have the Novatel Merlin EX720. I was able to find the original Novotel software for this modem. I uninstalled the Sprint Smartview and loaded up the Novatel software and was able to select EVDO only! It worked no more switching or disconnects. It was the Sprint Smartview causing all the problems.<br><br>Regards,<br>Danny]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/Smartview-23083448</guid>
<pubDate>Fri, 25 Sep 2009 16:40:14 EDT</pubDate>
</item>

</channel>
</rss>

