Bamfhansen
join:2009-10-07
denmark
|  [Help Me] DAP-2553 getting access too configuration
I am in desperate need of some assistance.
I recently bought my access Point the DAP-2553 and its functioning good.
But i cant get too log on too the AP for configuration of the security key? so right now I've got an open AP 
In the install guide is an address 192.168.0.50 but that doesn't work  so i called the support too ask fore guidance but they couldn't help me either
Then i tried too install the APManagerII program but that requires MySQL 5,0 and ODBC 3,51 i have installed both and i think i have configured it correct? but again no luck.
I am going from a Zyxel Router and through a hub.
PLZ HELP ME  what am i doing wrong?
i am a newbie in this AP and MySQL - so PLZ step by step explanations |
|
Bamfhansen
join:2009-10-07
denmark
| Ive figured out the setup off MySQL and got the ApManagerII installed - but i still cant get to configuring the AP for kryptation? it keeps saying SNMP time out?
Ive spoke with Support and he said something about Static IP setup. but i don't know how to do that
someone help me please :O) |
|
Bamfhansen
join:2009-10-07
denmark | Thanks all - i found out the solution by my self my AP is now protectet. |
|
NDskindoc
@atgi.net | Any chance you could tell me tell me what you did to configure the AP? I can't get access to it either! thanks |
|
DAP2253 User
@shawcable.net
| Plug the DAP-2553 into a desktop or laptop and MANUALLY configure the desktop/laptop to use an IP address of 192.168.0.1
Once your system is configured, you can log into the DAP-2253 to configure the access point and change its IP to match your own network.
After DAP-2553 is configured, change your desktop/laptop back to original network settings.
You should be all set to go.
Good luck. I just installed 2 of these in an office building and have full 2-floor coverage of about 18,000 sq ft. Call me impressed. |
|
