http://www.dslreports.com/forum/Help-Me-DAP2553-getting-access-too-configuration-23162193 en Fri, 10 Feb 2012 04:35:08 EDT Fri, 10 Feb 2012 04:35:08 EDT http://www.dslreports.com/forum/Re-Help-Me-DAP2553-getting-access-too-configuration-23364771
Once your system is configured, you can log into the DAP-2253 to configure the access point and change its IP to match your own network.

After DAP-2553 is configured, change your desktop/laptop back to original network settings.

You should be all set to go.

Good luck. I just installed 2 of these in an office building and have full 2-floor coverage of about 18,000 sq ft. Call me impressed.]]> http://www.dslreports.com/forum/Re-Help-Me-DAP2553-getting-access-too-configuration-23364771 Thu, 19 Nov 2009 12:17:21 EDT http://www.dslreports.com/forum/Re-Help-Me-DAP2553-getting-access-too-configuration-23298635 http://www.dslreports.com/forum/Re-Help-Me-DAP2553-getting-access-too-configuration-23298635 Thu, 05 Nov 2009 20:14:04 EDT http://www.dslreports.com/forum/Re-Help-Me-DAP2553-getting-access-too-configuration-23277437 http://www.dslreports.com/forum/Re-Help-Me-DAP2553-getting-access-too-configuration-23277437 Mon, 02 Nov 2009 08:18:33 EDT http://www.dslreports.com/forum/Re-Help-Me-DAP2553-getting-access-too-configuration-23211261
Ive spoke with Support and he said something about Static IP setup. but i don't know how to do that

someone help me please :O)]]> http://www.dslreports.com/forum/Re-Help-Me-DAP2553-getting-access-too-configuration-23211261 Tue, 20 Oct 2009 08:24:35 EDT http://www.dslreports.com/forum/Help-Me-DAP2553-getting-access-too-configuration-23162193
I recently bought my access Point the DAP-2553 and its functioning good.

But i cant get too log on too the AP for configuration of the security key? so right now I've got an open AP :(

In the install guide is an address 192.168.0.50 but that doesn't work :huh: so i called the support too ask fore guidance but they couldn't help me either :(

Then i tried too install the APManagerII program but that requires MySQL 5,0 and ODBC 3,51 i have installed both and i think i have configured it correct? but again no luck.

I am going from a Zyxel Router and through a hub.

PLZ HELP ME :) what am i doing wrong?

i am a newbie in this AP and MySQL - so PLZ step by step explanations :)]]> http://www.dslreports.com/forum/Help-Me-DAP2553-getting-access-too-configuration-23162193 Sat, 10 Oct 2009 10:27:40 EDT