Cael
join:2009-10-12
Clinton Township, MI
1 edit | cant see wired pcs on 2wire 2701HG-B under network page
i've tried resetting. ive tried a hard 30-30-30 to reset factory settinsg (didnt work>_>) called AT&T DSL support and got disconnected second i said "networked pcs not showing".
the problem is only atm Wirelessly connected PCs/Devices are showing up. not eithernet connected. im trying to run a lil webserver for a forum just for friends and long distance family. but because the wired server isnt showing on Home Network page. i cant set any mapped ports.
here,
dispite at the time i had taken that my wired server is connected. (i purposely blanked ut network name and AP mac address there :P)
things were fine untill about a week ago it updated it's firmware.
if it matters this pc im using to access that page. uses windows 7 ultimate x86 (yes legitimate promotional retail copy[went to that the new efficiency seminar in detroit on the 7th) |
|
wayjac
Premium,MVM
join:2001-12-22
Indy | Are you sure the pc's firewall isn't the cause
Is the 192.168.1.73 device the server |
|
Cael
join:2009-10-12
Clinton Township, MI
| said by wayjac  :Are you sure the pc's firewall isn't the cause Is the 192.168.1.73 device the server no that was when my PSP Connected ealier to check thru the PSN |
|
wayjac
Premium,MVM
join:2001-12-22
Indy | reply to Cael
I've found that if a device is left powered down/off for extented periods it will disappear from the local device list but still be in the Firewall's select a computer list |
|
Cael
join:2009-10-12
Clinton Township, MI
1 edit | thats the main issue. though that server's still there in firewall display. it shows for an IP 0.0.0.0 and ports dont get mapped.
edit: here see?
 |
|
wayjac
Premium,MVM
join:2001-12-22
Indy | Once the server is powered up it should show up on the local device list.
If that's not happening you can ping the server or generate some lan or internet traffic from the server to hasten its appearance on the local device list |
|
Cael
join:2009-10-12
Clinton Township, MI | i must of poste dit before you saw and respnded but here if you dunn se eit above you
»img525.imageshack.us/img525/258/71551815.png |
|
wayjac
Premium,MVM
join:2001-12-22
Indy | The device name suggest that you have a static private ip address set on that computer?
Can you post the results of a ipconfig /all from the server |
|
Cael
join:2009-10-12
Clinton Township, MI | that server's running Linux. rest of my machines are xp/windows 7 |
|
wayjac
Premium,MVM
join:2001-12-22
Indy | A recent thread about linux and a 2wire, had the poster make some adjustments to the way linux responds to arp requests if it has more than one ethernet interface |
|
Cael
join:2009-10-12
Clinton Township, MI | nah only 1 interface, though it appears it's already allocated 20 IP addresses is there any way to reset everything to bare minimum like to the day i just got it from AT&T? |
|
wayjac
Premium,MVM
join:2001-12-22
Indy
 ·AT&T Midwest
| You can clear all devices at this url
192.168.1.254/xslt?PAGE=J21
Use the clear local network button
Dhcp clients will show up by name
Static clients will show up by private ip address
A dhcp client with no name will show up by private ip address |
|
Cael
join:2009-10-12
Clinton Township, MI
| said by wayjac :You can clear all devices at this url 192.168.1.254/xslt?PAGE=J21 Use the clear local network button Dhcp clients will show up by name Static clients will show up by private ip address A dhcp client with no name will show up by private ip address that did the trick! thanks :3 |
|
