http://www.dslreports.com/forum/USG200-AntiX-not-working-23220910 en Fri, 10 Feb 2012 14:15:33 EDT Fri, 10 Feb 2012 14:15:33 EDT http://www.dslreports.com/forum/Re-USG200-AntiX-not-working-23224215 »ftp://ftp.zyxel.com/ZYWALL_USG_200/firmware/
--
openSUSE 11.1, KDE 4.2]]> http://www.dslreports.com/forum/Re-USG200-AntiX-not-working-23224215 Thu, 22 Oct 2009 11:28:11 EDT http://www.dslreports.com/forum/Re-USG200-AntiX-not-working-23224164 http://www.dslreports.com/forum/Re-USG200-AntiX-not-working-23224164 Thu, 22 Oct 2009 11:21:42 EDT http://www.dslreports.com/forum/USG200-AntiX-not-working-23220910 I activated all Anti-X features in trial mode (still have 20 days remaining) but nothing of this features seems to work.
Let me explain:
Anti-virus have one policies with "any" to "any" and all protocols enabled and "scan eicar" active.
When i transfer a file with "eicar virus test" via http (and ftp) between lan1 and wan, anti-virus of USG200 do his job and stop the transfer, but when i do the same test with a real infected file (P2P-Worm.Win32.Polip.a which is in the viruses list of the router) the infected file pass thru the router. The same behavior is hapen with other 3 types of viruses tested by me. All this files tested are confirmed as virused by "kaspersky internet security 9". In log of USG200 are signaled only eicar, and nothing else.
About others features like IDP/ADP i have run an full port scan from internet (to wan), and i see no reaction from IDP/ADP in log. Only records are "notice", made from firewall.
I mention that all features like antivirus, IDP, ADP are setted as enabled.
Firmware is 2.12(AQU.0), and all virus and IDP signatures are up-to-date.
Today i did even an hard reset folowed by reconfig, but i have the same result.
After i spended two days reading documentation and searching on internet i decided to make this post hoping to get some help.
Thanks in advance.]]> http://www.dslreports.com/forum/USG200-AntiX-not-working-23220910 Wed, 21 Oct 2009 19:19:14 EDT