http://www.dslreports.com/forum/Connecting-Zyxel-1200-V2-with-Dlink-DIR655-23245301 en Fri, 10 Feb 2012 19:24:03 EDT Fri, 10 Feb 2012 19:24:03 EDT http://www.dslreports.com/forum/Re-Connecting-Zyxel-1200-V2-with-Dlink-DIR655-23245715 If so then you can use these instructions... »Wireless Networking Forum FAQ »Using a Wireless Router as an Access Point]]> http://www.dslreports.com/forum/Re-Connecting-Zyxel-1200-V2-with-Dlink-DIR655-23245715 Mon, 26 Oct 2009 21:14:36 EDT http://www.dslreports.com/forum/Connecting-Zyxel-1200-V2-with-Dlink-DIR655-23245301
I want to use my Zyxel 1200 V2 gateway to use Dlink DIR-655 as a wireless access point. Does any one have done this in a past.?

Zyxel gateway has WAN 192.168.0.1/255.255.255.0 and LAN 10.59.1.1 /255.0.0.0. DHCP server IP NAT pool starts on LAN 10.59.1.10 -- > 10.59.1.255

Dir-655 has turned off DHCP server WAN set to Dynamic IP from DHCP server. LAN and Wireless ports/signal to 10.59.1.2 /255.0.0.0.

-----------------------------------------------------------
1)
I connected zyxel LAN to Dlink LAN ---> didn't get splash login screen on my wireless pc

2)
I connected zyxel LAN to Dlink WAN -->didn't get splash login screen on my wireless pc

Any ideal how to get this Dlink 655 to work like a bridge or something that works like it, just want to use its antennas for clients?

Thanks guys]]> http://www.dslreports.com/forum/Connecting-Zyxel-1200-V2-with-Dlink-DIR655-23245301 Mon, 26 Oct 2009 20:05:12 EDT