http://www.dslreports.com/forum/qwest-m1000-w-BEFSR8-23256529 en Thu, 09 Feb 2012 20:10:44 EDT Thu, 09 Feb 2012 20:10:44 EDT http://www.dslreports.com/forum/Re-qwest-m1000-w-BEFSR8-23264612
First set up the lan ips for the modem and router so they are matching

Like 192.168.0.1 and 192.168.0.2

Then add the router ip .2 to the dmz zone of the modem.
Switch on the transparent bridging under advanced setup > Wan setup.

Then go to your router and set it to PPPoE and enter your details. It should be fine. So now your dsl modem is just a modem and the router handles everything. In other words no more 2 routers.]]> http://www.dslreports.com/forum/Re-qwest-m1000-w-BEFSR8-23264612 Fri, 30 Oct 2009 04:39:00 EDT http://www.dslreports.com/forum/qwest-m1000-w-BEFSR8-23256529 I am one who does not like 2 routers
but its here and i can not figure out how to port forward

M1000 f/ qwest is ip 192.168.0.1 dhcp on
dns is 192.168.1.1 (this i do not get)

BEFSR-8 is ip 192.168.1.1 dhcp on

the passworrd and qwest info for login is on both boxes and
it works
I am trying to port forward

I port forwarded port XXXX from m1000 to 192.168.1.1
then I forwarded the linsys port xxxx to the local ip of my security panel

what am I doing wrong?
convince me, not to can the linksys and switch, and just replace them with a 16 port switch
but then i would not learn something new today

Semper Fi]]> http://www.dslreports.com/forum/qwest-m1000-w-BEFSR8-23256529 Wed, 28 Oct 2009 18:17:36 EDT