Raj007
@airtelbroadband.in
| Systems used by wireless router for transmitting UPD packets
Hi all,
I am facing the problem related to request time out error when
I used three systems for sending/receiving the Udp packets.
The following configuration is implemented the wireless router.
- Disable encryption
- RTS threshold value set to 2347
- Fragmentation threshold value set to 2346
- Implemented 802.11g capability
So, we have maximum link capacity around 54Mbps but we are using maximum 6mbps for sending/receiving udp packet by UDP test code on all three system.
Please help me about why we are getting request time out error as soon as we start sending/receiving the UDP packets. |
|
nwrickert
sand groper
Premium,MVM
join:2004-09-04
Geneva, IL
 ·AT&T U-Verse
 ·AT&T Midwest
1 edit | There's not enough information given.
Note that UDP is a "best effort" service. There is no error recovery built into UDP. If a UDP packet is damaged, perhaps due to a collision between two systems sending at the same time, then that packet is dropped. If a system is waiting for that packet or waiting for a response to that packet, the loss of the packet will be seen as a timeout.
(edit) fix bad typo
--
AT&T Uverse; Zyxel NBG334W router (behind the 2wire gateway); openSuSE 11.0; firefox 3.0.14 |
|
