http://www.dslreports.com/forum/Systems-used-by-wireless-router-for-transmitting-UPD-packets-23288215 en Fri, 10 Feb 2012 20:40:48 EDT Fri, 10 Feb 2012 20:40:48 EDT http://www.dslreports.com/forum/Re-Systems-used-by-wireless-router-for-transmitting-UPD-packets-23288905
Note that UDP is a "best effort" service. There is no error recovery built into UDP. If a UDP packet is damaged, perhaps due to a collision between two systems sending at the same time, then that packet is dropped. If a system is waiting for that packet or waiting for a response to that packet, the loss of the packet will be seen as a timeout.
(edit) fix bad typo
--
AT&T Uverse; Zyxel NBG334W router (behind the 2wire gateway); openSuSE 11.0; firefox 3.0.14]]> http://www.dslreports.com/forum/Re-Systems-used-by-wireless-router-for-transmitting-UPD-packets-23288905 Wed, 04 Nov 2009 08:24:37 EDT http://www.dslreports.com/forum/Systems-used-by-wireless-router-for-transmitting-UPD-packets-23288215
I am facing the problem related to request time out error when
I used three systems for sending/receiving the Udp packets.

The following configuration is implemented the wireless router.

- Disable encryption
- RTS threshold value set to 2347
- Fragmentation threshold value set to 2346
- Implemented 802.11g capability

So, we have maximum link capacity around 54Mbps but we are using maximum 6mbps for sending/receiving udp packet by UDP test code on all three system.

Please help me about why we are getting request time out error as soon as we start sending/receiving the UDP packets.]]> http://www.dslreports.com/forum/Systems-used-by-wireless-router-for-transmitting-UPD-packets-23288215 Wed, 04 Nov 2009 00:49:20 EDT