 billaustinthey call me Mr. BillPremium,MVM
join:2001-10-13
North Las Vegas, NV
kudos:2 | reply to rv1414
Re: Need help w/ Speedstream 4100 and WRT610N When the modem is in bridge mode, it does no routing. It is simply a DSL to ethernet bridge. Since you can connect the PC and go on-line, Verizon will consider everything to be working.
Reset the router to factory defaults, wait for it to reboot, then power it off. Power off the modem, wait a minute and then power it back on. Connect the WAN port on the router to the Ethernet port on the modem. When you get DSL sync, power on the router. If you do not get an IP address, clone the MAC address from the PC into the router and then reboot both again. If you still don't get an IP, and you know your cables are good, exchange the router and start over. |
