| reply to Stunata
Re: I can't get my PAP2T-na to work with 2 sip accounts voip.ms stat page just does not register the line 1
the line 2 sub account registers just fine.
PAP2T says "can't connect to login server" for line 1
Line 2 says online.
I can change the server on line 1 or 2 from LA to Dallas or another server and it hooks right up. (but I can't use multi ring feature this way)
If I use a soft phone for the line 2 sip sub account it works fine. I can even dial to the extension 102 and it rings.
It seems like the PAP2T does not like the fact that it is trying to use the same IP address for the server on line 2. Or the server does not like that fact that the PAP2T has one IP address to forward things to even though I have the ports set to separate addresses. |
|
| Try changing the setting of NAT Mapping Enable for one or both lines. If no luck, please give modem type, whether configured as router, type of external router if any, router firmware, any voip-related settings in router or modem.
I have run PAP2T with both lines registered to same IP/port with no trouble. |
|
| I tried the NAT Mapping on and off for both lines on the PAP2T. Same results.
The modem/router is a Netopia/Motorola 3347 and it is configured as a router with QOS giving the PAP2T and an ooma box priority based on their ip addresses.
I can configure a second line on the PAP2T and it works fine. Just as long as it is a different provider. |
|
maziloFrom MaziloPremium
join:2002-05-30
Lilburn, GA
kudos:1 | You may want to post your configurations here. Until then, all suggestions are based on wild guesses. |
|
| A Screen shot of the PAP2T setup? would that work?
What is strange is that it works with different service provider on each line. Maybe I should try and test two free Callcentric lines and see if it does the same thing. This way I can rule out if it is me or voip.ms |
|
Reviews:
 ·Verizon FiOS
| Yes, that would work... Get the screenies for both lines (switch to advanced view first). I have an unlocked pap2 with 2 lines on voip.ms registered to the same server. The only thing different about my configuration is that it's optimized for faxing. |
|
|
|
