upbPremium
join:2004-03-15
Carriere, MS
kudos:1
1 edit | reply to Jeff65
Re: [Tomato] WRT54GL slow to recognize lost connection said by Jeff65 :
It doesn't seem to reduce the amount of time it takes for the router to see that the WAN is down.
The only other parameters I can suggest adjusting are the non-volatile ram variables "ppp_idletime" and "pppoe_idletime". You can telnet to the router and use the commands
nvram get ppp_idletime
nvram get pppoe_idletime
to examine the current defaults (in my router they're both set to 5 pings). One source (»forum.openwrt.org/viewtopic.php?id=2298) suggests reducing the value of ppp_idletime to "1" while leaving pppoe_idletime unchanged. I'd try
nvram set ppp_idletime=1
to see if that clears the problem up. Good luck.
[edit] You must restart pppoe / ppp before the nvram parameters are read and go into effect. |
