bumkus join:2001-12-04 Scottsbluff, NE |
to SuperWISP
Re: Noisy UBNT gear appearing in our areaWe are using some of the standard 802.11a/b/g Ubiquiti radios in Laramie, but none of the AirMax stuff.
FYI, you will start to see our ESSIDs disappear off of the standard 802.11b 20mhz channels - we are converting all of our 2.4ghz customers to 10mhz channels. Channel centers will remain the same, we will just be using smaller channels. If you sniff in 10mhz mode, you will be able to see the IDs.
Matt Larsen vistabeam.com |
|
Matt, if you use 10 MHz channels, it is better not to keep the centers the same, as this prevents splitting the channels with others to coordinate. Most radios that can operate on narrow channels are capable of using just the upper or lower half. |