 devolicPremium
join:2001-11-22
Oscoda, MI
1 edit | [General] WZR-HP-G300NH Router I just got this router and it didn't come with instructions.
(1) What is the web address to access the Config Screen. It is new so it would be default. What is the User and Password?
(2) What Bit Torrent client and version is installed?
(3) For the NAS can it be a NTFS drive or does it have to be FAT32? If fat, What is the maximum file size of the specification?
(3) Also, does the external antennas control the "G" or "N" mode?
(4) What is the movie engine switch on the side for?
--
WinXP Pro SP3 |
| In case you haven't figured it out and stuck OpenWRT/DDWRT/etc on it yet, for stock firmware:
1) 192.168.11.1
2) (Don't remember, I've since put OpenWRT on it and use Transmission)
3.1) Has to use FAT32 (or XFS?) which I believe limits to 4GB files. 3rd party firmwares can support others, though.
3.2) Not a wireless expert, not sure what you mean, but I haven't had any issues using b/g/n all together.
4) I think it's for optimizing streaming video from NAS, but not sure... could be for optimizing streaming video? Haven't fiddled with it cause it probably doesn't do me any good now!
I've misplaced my instructions, so hope the solid answer for (1) is good enough to get you started, especially if you're flashing it with something else. I remembered it seemed to take TFTP ~10s after plugging it in and I had to manually add its MAC to ARP cache to be able to flash it. |
