dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
7670
share rss forum feed

xtreme911

join:2004-03-13
Canada

Siemens Speedstream 4200 Part 060-d242-a65 + no telnet

Hello,

Details on my unit are:

System Summary
System Type: SpeedStream 4200-Series
Config Part #: 003-y093-G05
Firmware Part #: 004-D240-A3S

It has the Bell FW on it, and have been able to access the FTP using profile 1 (mfadmin credentials) to dump the two *.img files and the two config files. These files are in a safe place for now

The problem is I would like to use an application called DMT found HERE to monitor this modem.

I am looking at DMT v9.01 - for the SpeedStream 4100/4200/5100/5200, Teledat 302/430.

It seems with my Siemens Speedstream 4200 Part 060-d242-a65 and firmware combination, I do not have telnet capabilities, and therefore I am unable to use the DMT application with my modem.

Does anyone have any ideas on how I might get this working?

Thanks.


Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
kudos:18
Try the info in the thread below.

»A50 FW on 5200, no telnet or FTP !!!

xtreme911

join:2004-03-13
Canada

2 edits
reply to xtreme911
Click for full size
downloadRemote Manag···cess.pdf 20,946 bytes
as_config.htm
I was unable to access ICGabe's website, but by using version 1.1 posted to the forum I get the messages: packet sent but not received.

I have installed the prerequisite software for the tool and am using a sort username/password, with the correct interface and MAC address info.

Just to add, I am able to FTP to the modem and the profile1 credentials work for this, I just cannot telnet to the modem as connection is always closed on port 23.

On »192.168.2.1/lansrvscfg.htm telnet port is 23.

Also attached is my »192.168.2.1/ras_config.htm output.

EDIT: Also to see the error go to »Re: Speedstream 4200 firmware (Bell isp)

Thanks.


Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
kudos:18
said by xtreme911:

I was unable to access ICGabe's website, but by using version 1.1 posted to the forum I get the messages: packet sent but not received.
Huh? It is up and working fine. Version 1.5 is available there.

»www.gabrielstrong.com/



--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?

xtreme911

join:2004-03-13
Canada
Yeah that link works, I was using »planeta.terra.com.br/informatica/icgabe/ which I quess is dead now....

Because I was able to dump by Bell FW I was not as paniced to update the FW to A8M. The telnet server seems to be uncrippled and working on this (generic?) FW.

This means DMT v9.01 - for the SpeedStream 4100/4200/5100/5200, Teledat 302/430 work perfectly *mission accomplished there*

It turns out the firmware update exe required a windows XP computer as I was unable to do the update with my Windows Vista machine.

Now that I have the two *.img files and the two config files, and FTP access to the Speed Stream 4200 running the A8M firmware, can I just get the same four files from the FTP and put back the four files dumped from the Bell FW to revert back to the Bell FW? Does the same apply from going from the Bell FW to the A8M one so that a windowsXP machine is not mandatory?

Thanks.