chuckkk
join:2001-11-10
Warner Robins, GA Reviews:
 ·Cox HSI
| reply to chuckkk
Re: Cox & Speed 7/20/2010 ~ 7:50 AM
This is a large change for the better from earlier tests to the Chicago area.
Connected to: miranda.ctd.anl.gov -- Using IPv4 address
Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
checking for firewalls . . . . . . . . . . . . . . . . . . . Done
running 10s outbound test (client-to-server [C2S]) . . . . . 3.31Mb/s
running 10s inbound test (server-to-client [S2C]) . . . . . . 17.58Mb/s
The slowest link in the end-to-end path is a 45 Mbps T3/DS3 subnet
Information: Other network traffic is congesting the link
[S2C]: Packet queuing detected
WEB100 Enabled Statistics:
Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
checking for firewalls . . . . . . . . . . . . . . . . . . . Done
running 10s outbound test (client-to-server [C2S]) . . . . . 3.31Mb/s
running 10s inbound test (server-to-client [S2C]) . . . . . . 17.58Mb/s
------ Client System Details ------
OS data: Name = Windows 7, Architecture = x86, Version = 6.1
Java data: Vendor = Sun Microsystems Inc., Version = 1.6.0_20
------ Web100 Detailed Analysis ------
45 Mbps T3/DS3 link found.
Link set to Full Duplex mode
Information: throughput is limited by other network traffic.
Good network cable(s) found
Normal duplex operation found.
Web100 reports the Round trip time = 97.51 msec; the Packet size = 1460 Bytes; and
There were 39 packets retransmitted, 829 duplicate acks received, and 809 SACK blocks received
The connection was idle 0 seconds (0%) of the time
S2C throughput test: Packet queuing detected: 27.39%
This connection is sender limited 34.76% of the time.
This connection is network limited 65.24% of the time.
Web100 reports TCP negotiated the optional Performance Settings to:
RFC 2018 Selective Acknowledgment: ON
RFC 896 Nagle Algorithm: ON
RFC 3168 Explicit Congestion Notification: OFF
RFC 1323 Time Stamping: OFF
RFC 1323 Window Scaling: ON
Server 'miranda.ctd.anl.gov' is probably behind a firewall. [Connection to the ephemeral port failed]
Client is probably behind a firewall. [Connection to the ephemeral port failed]
Packet size is preserved End-to-End
Server IP addresses are preserved End-to-End
Information: Network Address Translation (NAT) box is modifying the Client's IP address
Server says [98.184.8x.xx] but Client says [192.168.0.xxx]
WEB100 Kernel Variables:
Client: localhost/127.0.0.1
CurMSS: 1460
X_Rcvbuf: 16777216
X_Sndbuf: 16777216
AckPktsIn: 2019
AckPktsOut: 0
BytesRetrans: 56940
CongAvoid: 0
CongestionOverCount: 0
CongestionSignals: 1
CountRTT: 1081
CurCwnd: 251120
CurRTO: 288
CurRwinRcvd: 1256960
CurRwinSent: 5888
CurSsthresh: 521220
DSACKDups: 0
DataBytesIn: 0
DataBytesOut: 19023980
DataPktsIn: 0
DataPktsOut: 13010
DupAcksIn: 829
ECNEnabled: 0
FastRetran: 1
MaxCwnd: 760660
MaxMSS: 1460
MaxRTO: 360
MaxRTT: 164
MaxRwinRcvd: 1404416
MaxRwinSent: 5888
MaxSsthresh: 521220
MinMSS: 1460
MinRTO: 280
MinRTT: 76
MinRwinRcvd: 65536
MinRwinSent: 5840
NagleEnabled: 1
OtherReductions: 77
PktsIn: 2019
PktsOut: 13010
PktsRetrans: 39
RcvWinScale: 8
SACKEnabled: 3
SACKsRcvd: 809
SendStall: 0
SlowStart: 0
SampleRTT: 92
SmoothedRTT: 88
SndWinScale: 8
SndLimTimeRwin: 0
SndLimTimeCwnd: 7307389
SndLimTimeSender: 3893523
SndLimTransRwin: 0
SndLimTransCwnd: 334
SndLimTransSender: 334
SndLimBytesRwin: 0
SndLimBytesCwnd: 8404360
SndLimBytesSender: 10619620
SubsequentTimeouts: 0
SumRTT: 105412
Timeouts: 0
TimestampsEnabled: 0
WinScaleRcvd: 8
WinScaleSent: 8
DupAcksOut: 0
StartTimeUsec: 33867
Duration: 11205143
c2sData: 4
c2sAck: 4
s2cData: 4
s2cAck: 4
half_duplex: 0
link: 0
congestion: 1
bad_cable: 0
mismatch: 0
spd: 13.59
bw: 13.03
loss: 0.000076864
avgrtt: 97.51
waitsec: 0.00
timesec: 11.00
order: 0.4106
rwintime: 0.0000
sendtime: 0.3476
cwndtime: 0.6524
rwin: 10.7148
swin: 128.0000
cwin: 5.8034
rttsec: 0.097513
Sndbuf: 16777216
aspd: 0.00000
CWND-Limited: 276.05
minCWNDpeak: 36500
maxCWNDpeak: 760660
CWNDpeaks: 53
The theoretical network limit is 13.03 Mbps
The NDT server has a 8192.0 KByte buffer which limits the throughput to 1312.64 Mbps
Your PC/Workstation has a 1371.0 KByte buffer which limits the throughput to 109.88 Mbps
The network based flow control limits the throughput to 59.51 Mbps
Client Data reports link is 'T3', Client Acks report link is 'T3'
Server Data reports link is 'T3', Server Acks report link is 'T3' |
