dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
4133
share rss forum feed

fnx

join:2004-08-13
Longueuil, QC

SpeedStream 5360 VCI/VPI Settings

Hello,

Is there any ways to setup SpeedStream 5360 VCI/VPI Settings?

Thanks



Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
kudos:18

1 edit

The 5360 is setup with a Automatic Table in the Firmware with the top 11 most common VPI/VCI numbers. It will automatically work with the following Virtual Circuits.

5360 VCI/VPI Settings

quote:
The 5360 supports the following preset vcs:

* 0/32
* 0/33
* 0/34
* 0/35
* 0/36
* 0/37
* 0/38
* 8/35
* 8/43
* 8/51
* 8/59
Is the DSL LED Solid Green or not?
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?

fnx

join:2004-08-13
Longueuil, QC

DSL LED Solid Green. Is it okay?



Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
kudos:18

1 edit

Depending on your ISP when the DSL LED is solid Green and the ISP uses any 1 of the 11 listed VC pairs then the Modem is synced up and it should be working unless you need to supply PPPoE as some ISPs require.

5360 - LED Indication of Internet Ready Status

quote:
When the 5360 is ready to connect to the Internet, the PWR, DSL, and ENET leds should all be solid green, while the ACT LED should be (a) off or (b) blinking green.
Who is your ISP?
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?

fnx

join:2004-08-13
Longueuil, QC

Teksavvy.

Also, if I read correctly, my modem doesn't have any IP or telnet support?

So how I check my line stats? Specially "occupation" and "noise margin"...



Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
kudos:18

You can't get any Stats, Occupation Percentages, SNR Margins, or any other diagnostic data from the 5360. You would call your ISP and they will be able to tell you your current margin, SNR and Sync Rates both upstream and downstream.

»Efficient Networks Forum FAQ »What is the SpeedStream 5360

»Efficient Networks Forum FAQ »Does the 5360 support syslog, snmp traps, etc.?

You can see the Sync Rates using EnterNet 300, but that is about it.

»Efficient Networks Forum FAQ »EnterNet 300 does not show the DSL Modem tab for my 5260 or 5360?
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?


fnx

join:2004-08-13
Longueuil, QC

So I guess this modem is getting old and should be replaced right?

Any suggestions..?

Thanks for your help Doctor



Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
kudos:18

It supports up to 8 Mbps ADSL Downstream so until you have ADSL2 or ADSL2+ at faster speeds than 8 Mbps the modem is fine to use. Just setup a Router behind it to share the DSL with multiple PCs.
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?