 nokken
join:2001-02-07
Memphis, TN | reply to nokken
Re: [Cooling] Tips for installing massive HSFs?
It's alive! | 
My first attempt at cable management. | 
Stock Clock Stability Testing |
I think it may actually be easier installing the Tuniq than the stock cooler ... but maybe I did it wrong ... do my temps look OK for stock?
My e6750@2.66 was pushing 25C idle on the stock cooler... 44C encoding in HandBrake.
First boot with the e8400 and Tuniq in place BIOS was reading temp at a straight 39C. When I got into Windows, CoreTemp was showing the same. In fact, it wasn't dropping below 39C even though SpeedStep and C1E were clocking it down to 2100 and 2500.
Anyone know off-hand the max spec vcore for e8400 E0?
Right now it's set to auto and I don't want to screw it up... although I did notice in HWMonitor that vcore was running at 1.07 at idle... I'm not sure if that's a good thing or bad thing to be so low.
--
"The key to flying is falling and not hitting the ground." |
|
2 edits | I use 1.25625 for 3.99GHz.
Orthos stable 24hrs 2 tests
EO stepping "should" need less v's
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster .........Auto
CPU Clock Ratio .................9
Fine CPU Clock Ratio ............0.0
CPU Frequency ...................4.44(444x9)3996 3.96GHz.
Clock Chip Control
Standard Clock Control
CPU Host Clock Control............Enabled
CPU Host Frequency (Mhz) .........444
PCI Express Frequency (Mhz) ......100 Lock
C.I.A.2 ..........................Disabled
Advanced Clock Control[Press Enter]
CPU Clock Drive...................800
PCI Express Clock Drive...........900
CPU Clock Skew (ps)...............0ps
MCH Clock Skew (ps)...............0ps
DRAM Performance Control
Performance Enhance................Standard
Extreme Memory Profile (X.M.P.)....Disabled
(G)MCH Frequency Latch.............400
System Memory Multiplier ..........2.00D “D” straps 400fsb
Memory Frequency (Mhz) ............800 @ 888mhz 1:1
DRAM Timing Selectable ............Manual
Standard Timing Control
CAS Latency Time...................5
tRCD ..............................5
tRP'...............................5
tRAS...............................12
Advanced Timing Control
tRRD...............................auto
tWTR...............................auto
tWR................................auto
tRFC...............................auto
tRTP...............................auto
Command Rate (CMD) ................2T
Driving Strength Profiles
Driving Strength ...................1066
Channel A
Static tRead Value..................9
tRD Phase0 Adjustment...............Auto
tRD Phase1 Adjustment...............Auto
tRD Phase2 Adjustment ..............Auto
tRD Phase3 Adjustment...............Auto
Trd2rd(Different Rank)..............Auto
Twr2wr(Different Rank)..............Auto
Twr2rd(Different Rank)..............Auto
Trd2wr(Same/Diff Rank)..............Auto
Dimm1 Clock Skew Control............Auto
Dimm2 Clock Skew Control............Auto
Channel B
Static tRead Value.....................9
tRD Phase0 Adjustment..................Auto
tRD Phase1 Adjustment..................Auto
tRD Phase2 Adjustment .................Auto
tRD Phase3 Adjustment..................Auto
Trd2rd(Different Rank).................Auto
Twr2wr(Different Rank).................Auto
Twr2rd(Different Rank).................Auto
Trd2wr(Same/Diff Rank).................Auto
Dimm1 Clock Skew Control...............Auto
Dimm2 Clock Skew Control...............Auto
Motherboard Voltage Control
Voltage Type... Manual
CPU
Load Line..................Disabled
CPU V core.................125625V
CPU Termination…1.200V.....1.200V
CPU PLL.........1.500V.....1.500V
CPU Reference...0.760V.....Auto
MCH/ICH
MCH Core……........1.24V Northbridge
MCH Reference….…….0.757V....Auto
MCH/DRAM Ref.…....0.900V....1.04
ICH I/O……………….....1.500V....1.500V
ICH Core…………......1.100V....1.200V
DRAM
DRAM Voltage ……....1.800V...2.08V
DRAM Termination .…0.900V...1.04
Channel A Reference 0.900V..1.04
Channel B Reference 0.900V..1.04
Advanced BIOS Features
Limit CPUID Max. to 3 .......Disabled
No-Execute Memory Protect ...Enabled
CPU Enhanced Halt (C1E) .....Enabled
C2/C2E State Support ........Disabled
x C4/C4E State Support ......Disabled
CPU Thermal Monitor 2 (TM2) .Enabled
CPU EIST Function ...........Enabled
Bios F-10
--
Southern Ontario,Canada |
|
 Ray422Premium,MVM
join:2002-03-04
Lost
kudos:11
 ·RoadRunner Cable
| Those are nice settings, but are we supposed to play a guessing game about your system? OK, I'll play.
CPU type: E8400, like the OP?
Motherboard: Most would guess Gigabyte, but some wouldn't know?
Mobo model: EP45-UD3P, just a wild guess?
Cooler: The original OP topic was massive heatsinks, but we missed what yours was. Same Tuniq tower as OP?
Temps: Those settings don't mean anything without load temps on whatever kinda system your running?
Stability: Shall we assume it's stable?
Perhaps my bad reading, but I can't seem to comprehend your post.
--
Things I like - Team Discovery - Quads©3.3 to 4.1ghz - Strawberry Ice cream
How's That Hope & Change Working For Ya?
|
|
1 edit | No need to be a smart a**
I never asked you to play
My point? he might not be to far off a higher OC with little changes 
coolermaster hyper212+
He has an 8400 and is mentioning voltage
Stable..?
All screenies are posted on the Giga forum including temps
Have a great day
--
Southern Ontario,Canada |
|
Ray422Premium,MVM
join:2002-03-04
Lost
kudos:11 Reviews:
·RoadRunner Cable
| said by Tyreman:No need to be a smart a** I never asked you to play No one is trying to be a smart a**. I was just trying to comprehend your system settings and particularly your voltage. Since I run 3 sytems with Tunig towers and 1 with T120, I was interested in the type system and temperatures at the 4ghz speed as compared to mine. I thought this was an open forum and we could all play. I apologize for not asking your permission.
said by Tyreman:Stable..? All screenies are posted on the Giga forum including temps Have a great day ...aaaah, so now we should all go search the Giga forum for the information lacking in your post. Geez, I'm suddenly not interested in your system anymore....and you're right, I surely don't want to play 
--
Things I like - Team Discovery - Quads©3.3 to 4.1ghz - Strawberry Ice cream
How's That Hope & Change Working For Ya?
|
|
1 edit | Yes I thought it was an open forum(boy was I wrong there) thats why I posted those settings as he may not need much to get more
Sorry I didn't ask your permission to post that 
You have my sincerest apology 
Its pretty easy to find on the Giga forum
If I'd post all kinds of screenies you'd complain about thats not about massive heat sinks or you probably would have difficulty comprehending.
--
Southern Ontario,Canada |
|
| reply to nokken
no ssd come on $100 for a 30 GB ssd would do u good.
I have 2 in a raid 0 I will never go back to a HDD as a boot drive. |
|
