Jet101Jet101Premium
join:2009-10-01
Pflugerville, TX Reviews:
 ·Clearwire Wireless
 ·Callcentric
2 edits | reply to Soybomb
Re: pap2t, one line loses registration when in use Try setting your "register expires" to something way less than 3600. Try 120 and see what happens. You can set it higher if that works until you see expired registrations again. I was fiddling with this yesterday for the same reason on a PAP2T.
Are the SIP ports on both lines set to 5060? You could also try something like 5062 on the 2nd line. But I'm running 3 devices through the same network all registered to voip.ms on port 5060, and all three are staying registered fine. Oh yeah...I might mention, I have these on a Clear internet network, so it's going through a double NAT. Still working great. All three devices are set up in a ring group, and all ring fine on incoming call. |
