dslreports logo
 
    All Forums Hot Topics Gallery
spc
uniqs
4
mbruno
join:2003-07-03
Salisbury, MD

mbruno to DocLarge

Member

to DocLarge

Re: [HELP] help with new router config Cisco 1921

said by DocLarge:

I don't think I've ever seen that. For some reason, you're gi0/0 interface is finding another device (possibly latent entry from switching between your 871 and 1921??).

Try doing a "clear ip route *" from and see if it drops off...
I can try but it will take at least 5 to 10 mins to switch over. If you want to stay here I will try it now.
DocLarge
Premium Member
join:2004-09-08

1 edit

DocLarge

Premium Member

No prob... I've got access from my I-phone...

EDIT

What I sometimes do in this instance is stick a consumer router on line (i.e, Linksys WRV200, Netgear FVS114), and set it up for DHCP. Then from there, I take a look at it's routing table entries for a comparison.

Oh, I forgot something; when you're back up, do a "sh ip int brief" and see if your gi0/0 is up and running...
mbruno
join:2003-07-03
Salisbury, MD

1 edit

mbruno

Member

no luck

I have cleared the ip route tables and I always do a sh ip int brief.