dslreports logo
 
    All Forums Hot Topics Gallery
spc
Search similar:


uniqs
885

beckett
@109.76.62.x

beckett

Anon

P-660HW-T1_v2 total bandwidth usage

Hi,
Does anyone one know if it is possible to measure total bandwidth in a month with this modem (Zxyel P-660HW-T1_v2), I had a look through the log options and the summary information but cannot find anything.
OGalati
join:2005-08-19
1682

OGalati

Member

Hi.
You can see accumulated traffic since boot up by Telnet CLI command:
dev chann disp mpoa00
If you have another MPOA channel running on another ATM Virtual Circuit (i.e. IPTV,etc), I guess you might use
dev chann disp mpoa01, and so on, and aggregate them.
---------- CHANNEL mpoa00 (80891264) ----------
type=5, ID=0, admState=1, opState=9
FLAGS: used=1 clidMatch=0 oos=0 sending=0 bodM=0 ring=0 alloXS=0 in=0, out=0
phone=0
proto=80, glbIdx=2 useIdx=2 cookie=cafe
inPkt = 139634, inDiscard = 0, inError = 0
inDrop = 0, inOctet = 163468675, inUCast = 139621
inSessOct= 0
inMCast = 0
outPkt = 83989, outDiscard = 10, outError = 0
outOctet= 15177654, outUCast = 83989, outMCast = 0
outSesOct= 0, full = 0
dqOctet=0 dqThresh=60000 txCntDownTm=0 pktTraceDir=3 drvQ=807a4098
txClk=0, rxClk=4350, idleTime(ID=0 val=0) rxAccm=00000000 txAccm=00000000
Call: type=9 dir=INCOMING-CALL proto=a maxTime=0 ref=11 txR=512000 rxR=1500000 up=16737
dir#= remote= local#=
Usage: Octet(163468675, 15177654), Bps(1176, 592,) Ops(147, 74,)
Clu(0, 0),uptime = 0:08:16
L1: pktTx=8019234c pktRx=80029efc
L2: pktOut=0 pktIn=80192984
up-NDIS: usr=0 dataReq=0 dataInd=0 eventReq=0 eventInd=0
down-NDIS: sap=0 dataReq=0 dataInd=0 eventReq=0 eventInd=0
Both bold values are (outgoing, incoming) and have their OID for SNMP
OID:.1.3.6.1.2.1.2.2.1.10.3 for incoming
OID:.1.3.6.1.2.1.2.2.1.16.3 for outgoing

Regards.