Topic 'MTU Settings?' in forum 'Bresnan Online users forum' - dslreports.com http://www.dslreports.com/forum/MTU-Settings-25478041 en Sat, 25 May 2013 01:44:39 EDT Sat, 25 May 2013 01:44:39 EDT Re: MTU Settings? http://www.dslreports.com/forum/Re-MTU-Settings-25481327 http://www.dslreports.com/forum/Re-MTU-Settings-25481327 Sat, 12 Feb 2011 19:50:24 EDT Re: MTU Settings? http://www.dslreports.com/forum/Re-MTU-Settings-25478529 http://www.dslreports.com/forum/Re-MTU-Settings-25478529 Sat, 12 Feb 2011 02:08:50 EDT MTU Settings? http://www.dslreports.com/forum/MTU-Settings-25478041
Notice something?

ralph1 etc # ifconfig eth8
eth8 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx
inet addr:174.45.xxx.xxx Bcast:255.255.255.255 Mask:255.255.252.0
UP BROADCAST RUNNING MULTICAST MTU:576 Metric:1
RX packets:111971922 errors:0 dropped:0 overruns:0 frame:0
TX packets:52314260 errors:5 dropped:0 overruns:0 carrier:8
collisions:0 txqueuelen:1000
RX bytes:2486652505 (2.3 GiB) TX bytes:931711227 (888.5 MiB)
Interrupt:17 Base address:0xe000

This is including a fresh reboot of the router. I'm gonna call Bresnan in the morning on what's going on. Until then, I'm manually setting the MTU to 1500.
--
Bresnan 18M/1M
MyWS[E5200@3.75GHz,4GB RAM,2x1TB HDDs,Win7]
WifeWS[A64@2GHz,2GB RAM,120GB HDD,Win7]
Router[2xP3@1GHz,512MB RAM,18GB HDD,SMC 8432BTA,2xDigital DE504,Compaq NC3131,Intel Pro/1000MT,IBM Gigabit Ethernet-SX,Allied Telesyn AT2560FX,Gentoo Linux]]]> http://www.dslreports.com/forum/MTU-Settings-25478041 Fri, 11 Feb 2011 23:04:46 EDT