|reply to Dalkeith |
Re: IPv6 beta
I'm surprised that didn't work. I was having problems getting IPv6 running as well, and those steps finally worked for me.
I know anytime the router is rebooted, you have to redo the steps.
Adding your Ipv6 info below into the WAN Up script section under Administration/Scripts in the router config might help avoid having to do it manually (though you may still have do it).
ip -6 addr del 2607:f2c0:blah:1a8::1/0 dev br0
ip -6 addr add 2607:f2c0:blah:1a8::1/64 dev br0
ip -6 route del 2000::/3 dev ppp0
ip -6 route add 2000::/3 dev ppp
I'm not sure what else to tell you. Are you using the second version of the Ipv6 tomato firmware found at the bottom of the first page of this thread (date of bin the file is 26/02/10)?
Use the following sites to test Ipv6.
Success. This time there was "UP BROADCAST RUNNING MULTITASK" text in the br0 area that wasn't there before. I went ahead and just added the 1/64 and the route (and the WANUP script). test-ipv6.com results in 10/10 for IPv6 connectivity on my Windows 7 machine. Now I'll research and figure out why my Win XP over wireless isn't picking anything up IPv6 related.
Thank you very much