dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
5
share rss forum feed

theagitated

join:2011-04-15
Latonia, KY
reply to wayjac

Re: westell 7105 4 port wireless router via westell 6100

its a verizon branded westell router but yes the one for the 7501 looked like that and idk anything about the westell 6100 configuration screen.. as i said i'm a noob to networking and have basically zero knowledge on networking


wayjac
Premium,MVM
join:2001-12-22
Indy
kudos:1
Ok, I need more info on the 6100 modem
Do remember if you had to configure the 6100 before using it

Does the 6100 have a internet light

Do you know how to run the ipconfig /all command on the computer

Do you have two computers

theagitated

join:2011-04-15
Latonia, KY
no idk how to ipconfig/all on the computer. yes i hve two computer's and no i didn't config the 6100 i moved into a house with someone who already lived here and they have less knowledge about computers then i do.. i assume the isp config'ed the 6100 when they came out and set up the dsl connection..

theagitated

join:2011-04-15
Latonia, KY
and ye the 6100 has an internet light lit green. mind you the 6100 is not connected to the 7501 router right now..


wayjac
Premium,MVM
join:2001-12-22
Indy
kudos:1
reply to theagitated
Does the 6100 have a internet light


wayjac
Premium,MVM
join:2001-12-22
Indy
kudos:1
reply to theagitated
Here's a link to a page that shows how to find out the computers ip address
Finding the computer's ip address
I need you to find out what the ip address is on the computer that's connected to the 6100 and post all that info

theagitated

join:2011-04-15
Latonia, KY
ip address for the computer connected to the 6100 is

ip: 192.168.200.20


wayjac
Premium,MVM
join:2001-12-22
Indy
kudos:1
Ok, that's good you should get pencil and paper

Using the computer that's connected to the 6100
Write down and post the
ip address
subnet mask
default gateway
dhcp server
You will need this info later on

You need to make some changes to the 7501 configuration
The ip address must be changed and the dhcp server must be disabled

theagitated

join:2011-04-15
Latonia, KY
ip address :192.168.200.20
subnet mask :255.255.255.0
default gateway:192.168.200.1
DHCP :192.168.200.1


wayjac
Premium,MVM
join:2001-12-22
Indy
kudos:1
Compare this picture to your 7501




















Does your 7501 have the E1, E2, E3 and E4 ethernet ports
Are there any other ports

theagitated

join:2011-04-15
Latonia, KY
yes that is identical to the one i have. only difference is my has the verizon logo branded on the top of it

theagitated

join:2011-04-15
Latonia, KY
just double checked and the other difference is mine has a female usb port on the back of the router as well


wayjac
Premium,MVM
join:2001-12-22
Indy
kudos:1
reply to theagitated
Before changing anything have a look at the page where the changes will be made, if you have questions ask

Ok using the computer that's connected to the 7501

Click the advanced icon...............Click yes at the do you want to proceed prompt

On the advanced page click the Private LAN link

On the Private LAN page
Remove the check mark next to Private LAN DHCP Server Enable
The page will refresh/reload

Change the Modem IP Address to 192.168.200.200
Click the apply button wait one minute then turn the 7500 off

Connect the 7500 E2 port the 6100 lan port turn the 7500 on
Connect a computer to the 7500 E3 port

Check that you can access the internet

theagitated

join:2011-04-15
Latonia, KY
k will brb... gonna run all that down... may have screwed it up when i tried to run the westell 6100 into the wan port on the back of the westell 7105

theagitated

join:2011-04-15
Latonia, KY
i don't have a computer wired directly into the 7501 right now.. it is hooked into the back of the 6100


wayjac
Premium,MVM
join:2001-12-22
Indy
kudos:1
reply to theagitated
Here's a picture of the Private LAN page

























Is your Private LAN page the same as the picture I posted


wayjac
Premium,MVM
join:2001-12-22
Indy
kudos:1
reply to theagitated
With this setup the 7105 wan port is not used
You should connect the 7105 to another computer using a cable to make the changes

So the 7501 has a ethernet wan port?

theagitated

join:2011-04-15
Latonia, KY
yes the 7501 has a wan port. i made the changes setting up the network with the router and modem as instructed and its in the process of restarting itself right now

theagitated

join:2011-04-15
Latonia, KY
now nothing connects. it says internet status not connected. and thats with the changes made as you instructed.


wayjac
Premium,MVM
join:2001-12-22
Indy
kudos:1
reply to theagitated
Remember that the 7501 has a new ip address 192.168.200.200
Remember that you must not connect anything to the 7501 wan port

Do you have the wireless settings set up already or do you need to do that


wayjac
Premium,MVM
join:2001-12-22
Indy
kudos:1
reply to theagitated
Ok disconnect the 7501 from the 6100
Connect a computer to the 6100 you should be able to connect to the internet again

theagitated

join:2011-04-15
Latonia, KY
reset all the settings and the way i had it routed


wayjac
Premium,MVM
join:2001-12-22
Indy
kudos:1
Does that mean you did a factory reset of the 7501

theagitated

join:2011-04-15
Latonia, KY
yea i reset the 7501 to factory settings

theagitated

join:2011-04-15
Latonia, KY
also the wireless setup is already done my computer running wireless internet already reads the 7501 wirelessly. my only problem is getting the 750 to read an internet ip address


wayjac
Premium,MVM
join:2001-12-22
Indy
kudos:1
What is the ip address of the 7501

theagitated

join:2011-04-15
Latonia, KY
the ip on the 7501 is 192.168.200.1. the whole issue is getting the 7501 to connect to the internet as in browsing the web.


wayjac
Premium,MVM
join:2001-12-22
Indy
kudos:1
Ok I think I can help you do this
Does the 6100 have internet access now and can you leave a computer connected to it so we can talk

Do you have a second computer you can use to connect to just the 7501 to make some changes to it

theagitated

join:2011-04-15
Latonia, KY
yes the 6100 computer has access even though its older then dirt... this is my other computer thats running off a neighbor's bootlegged signal.. i have access to keep talking... and just to make sure we're on same page. i am trying to run a westell 6100 dsl modem through a westell 7501 router to link my second computer to the internet. the 7501 has the E1-E4 ports on it a wan port and a female usb port on the back of the router


wayjac
Premium,MVM
join:2001-12-22
Indy
kudos:1
I want you to use the 6100 to access the internet and talk with me

The computer that's running off a neighbor's bootlegged signal is the computer I want you to use to configure the 7501

Can you do this