alyin
Premium Member
join:2011-05-25 |
to Doctor Olds
Re: SS6300 newer firmware, can anyone help?said by Doctor Olds:Are you blocking JavaScript?
Are you using IE 7 or IE 8? Did you add the Modem IP (192.168.254.254 usually) to the Trusted Sites by it's IP?
Try using Firefox or SeaMonkey or Opera and make sure that you are allowing JavaScript.
I used firefox4.0.1, enable javascript, still no button appeared. |
actions · 2011-May-30 11:59 pm · (locked) |
| alyin |
alyin
Premium Member
2011-Jun-3 8:14 am
I have to consider defeated on this one, at least until some one PM me with other firmware.
Thank you all who helped me. |
actions · 2011-Jun-3 8:14 am · (locked) |
| |
Would you post a picture of the home/summary page from the 6300 |
actions · 2011-Jun-3 2:40 pm · (locked) |
alyin
Premium Member
join:2011-05-25 |
alyin
Premium Member
2011-Jun-5 8:34 pm
said by wayjac:Would you post a picture of the home/summary page from the 6300
I took 4 screen shots. |
actions · 2011-Jun-5 8:34 pm · (locked) |
 Doctor OldsI Need A Remedy For What's Ailing Me.
Premium Member
join:2001-04-19
1970 442 W30 |
DHCP Server shows as "Enabled" which is incorrect. |
actions · 2011-Jun-6 4:36 am · (locked) |
alyin
Premium Member
join:2011-05-25 |
alyin
Premium Member
2011-Jun-6 7:31 am
said by Doctor Olds:DHCP Server shows as "Enabled" which is incorrect.
The screen shots only showed the default setting without my customized configuration. |
actions · 2011-Jun-6 7:31 am · (locked) |
| |
to alyin
Thanks for posting the pictures If I were configuring your 6300 to be a access point Here's what the speedstream ip network page would look like if the linksys ip address is 192.168.1.1 |
actions · 2011-Jun-6 2:32 pm · (locked) |
|
alyin
Premium Member
join:2011-05-25 |
alyin
Premium Member
2011-Jun-7 9:00 am
Nope, not working, still the same old problem.
The computer connected to the SS6300 won't be able obtaining an IP address from the main router both wire and wireless.
I tried on different SS6300, so it's not the hardware, it must be the firmware.
Wayjac, please check your PM. |
actions · 2011-Jun-7 9:00 am · (locked) |
Doctor OldsI Need A Remedy For What's Ailing Me.
Premium Member
join:2001-04-19
1970 442 W30 |
What are you doing to try to get a new IP? Rebooting the PC or ipconfig /release then ipconfig /renew? |
actions · 2011-Jun-7 10:09 am · (locked) |
alyin
Premium Member
join:2011-05-25 |
alyin
Premium Member
2011-Jun-8 8:47 am
said by Doctor Olds:What are you doing to try to get a new IP? Rebooting the PC or ipconfig /release then ipconfig /renew?
I tried everything! |
actions · 2011-Jun-8 8:47 am · (locked) |
Doctor OldsI Need A Remedy For What's Ailing Me.
Premium Member
join:2001-04-19
1970 442 W30 |
Do you get an error message from ipconfig or does it return the command prompt like the command was successful?
Is the PC LAN adapter set to full DHCP with no DNS or IP info preset?
Do you have more than one PC to test with? |
actions · 2011-Jun-8 11:52 am · (locked) |
alyin
Premium Member
join:2011-05-25 |
alyin
Premium Member
2011-Jun-9 8:55 am
It came up Autoconfiguration IP Address: 169.254.9.179 on one laptop, 169.254.184.215 on another laptop.
Subnet Mask: 255.255.0.0
I tested on two laptops, both are not able to obtain IP address for the main router. |
actions · 2011-Jun-9 8:55 am · (locked) |
 your moderator at work
 hidden : Spam
|
| alyin |
alyin
Premium Member
2011-Jun-17 9:23 am
Re: SS6300 newer firmware, can anyone help?I have a good news to announce! LOL...
Finally, with the help of a great member "sn9", I updated the firmware to A3F, Bingo! it works like a charm!
I would like to take this opportunity to thank "sn9", "wayjac" and "Doctor Olds", I have learnt a lot from you guys. |
actions · 2011-Jun-17 9:23 am · (locked) |
Doctor OldsI Need A Remedy For What's Ailing Me.
Premium Member
join:2001-04-19
1970 442 W30 |
Congratulations! Very glad to hear of your successful final resolution.  Enjoy! |
actions · 2011-Jun-17 11:02 am · (locked) |
Enjoy!