alyin Premium Member join:2011-05-25 |
to wayjac
Re: SS6300 newer firmware, can anyone help?said by wayjac:Would you post a picture of the home/summary page from the 6300 I took 4 screen shots. |
actions · 2011-Jun-5 8:34 pm · (locked) |
Doctor OldsI Need A Remedy For What's Ailing Me. Premium Member join:2001-04-19 1970 442 W30 |
DHCP Server shows as "Enabled" which is incorrect. |
actions · 2011-Jun-6 4:36 am · (locked) |
alyin Premium Member join:2011-05-25 |
alyin
Premium Member
2011-Jun-6 7:31 am
said by Doctor Olds:DHCP Server shows as "Enabled" which is incorrect. The screen shots only showed the default setting without my customized configuration. |
actions · 2011-Jun-6 7:31 am · (locked) |
|
to alyin
Thanks for posting the pictures If I were configuring your 6300 to be a access point Here's what the speedstream ip network page would look like if the linksys ip address is 192.168.1.1 |
actions · 2011-Jun-6 2:32 pm · (locked) |
alyin Premium Member join:2011-05-25 |
alyin
Premium Member
2011-Jun-7 9:00 am
Nope, not working, still the same old problem. The computer connected to the SS6300 won't be able obtaining an IP address from the main router both wire and wireless. I tried on different SS6300, so it's not the hardware, it must be the firmware. Wayjac, please check your PM. |
actions · 2011-Jun-7 9:00 am · (locked) |
Doctor OldsI Need A Remedy For What's Ailing Me. Premium Member join:2001-04-19 1970 442 W30 |
What are you doing to try to get a new IP? Rebooting the PC or ipconfig /release then ipconfig /renew? |
actions · 2011-Jun-7 10:09 am · (locked) |
|
alyin Premium Member join:2011-05-25 |
alyin
Premium Member
2011-Jun-8 8:47 am
said by Doctor Olds:What are you doing to try to get a new IP? Rebooting the PC or ipconfig /release then ipconfig /renew? I tried everything! |
actions · 2011-Jun-8 8:47 am · (locked) |
|
Doctor OldsI Need A Remedy For What's Ailing Me. Premium Member join:2001-04-19 1970 442 W30 |
Do you get an error message from ipconfig or does it return the command prompt like the command was successful?
Is the PC LAN adapter set to full DHCP with no DNS or IP info preset?
Do you have more than one PC to test with? |
actions · 2011-Jun-8 11:52 am · (locked) |
alyin Premium Member join:2011-05-25 |
alyin
Premium Member
2011-Jun-9 8:55 am
It came up Autoconfiguration IP Address: 169.254.9.179 on one laptop, 169.254.184.215 on another laptop. Subnet Mask: 255.255.0.0
I tested on two laptops, both are not able to obtain IP address for the main router. |
actions · 2011-Jun-9 8:55 am · (locked) |