dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
76711
share rss forum feed

ispalten

join:2005-04-16
Clermont, FL
kudos:1
reply to BHNtechXpert

Re: [Internet] Best Routers for Bridged Networks

As you know, I'm on F. Other than that BHN iPad app which at least one other person is seeing what I am, F appears to be trouble free for me.

That said, I didn't see any improvement or change going from C to F? There could have been, but if there was I've not noticed it?

What are the 'minor annoyances' you are/were seeing?
--
Irv Spalten


BHNtechXpert
BHN Staff
Premium,VIP
join:2006-02-16
Saint Petersburg, FL
kudos:153
reply to FTBoomer
If you look back in this thread you will see each update and the fix log.

ispalten

join:2005-04-16
Clermont, FL
kudos:1
Don't know if you meant to reply to my question of what problems you had/have with F that made you look at the beta?

I've read the fix log, but my router came with C on it, and within a short period of time F was available and I put it on.

I want to know what I should be looking out for?
--
Irv Spalten


BHNtechXpert
BHN Staff
Premium,VIP
join:2006-02-16
Saint Petersburg, FL
kudos:153
reply to FTBoomer
The fix log posted with the announcement of F in this thread says everything that was fixed.


BHNtechXpert
BHN Staff
Premium,VIP
join:2006-02-16
Saint Petersburg, FL
kudos:153
reply to FTBoomer
Okay I'm pleased to report that both flavors of F firmware (Asus and Russian) seem to be working just fine. Before you upgrade to this firmware I STRONGLY recommend that you backup your router config, then default the router, upgrade firmware and then restore your settings.


BHNtechXpert
BHN Staff
Premium,VIP
join:2006-02-16
Saint Petersburg, FL
kudos:153
reply to FTBoomer
Okay the Asus RT-N66U (N 900) has been shipping now for a couple of weeks. My advice for the moment is to wait...the bugger shipped with a nasty firmware issue that was only recently corrected AND if you happen to get one with the old firmware it's very difficult to update it.


BHNtechXpert
BHN Staff
Premium,VIP
join:2006-02-16
Saint Petersburg, FL
kudos:153

4 edits
reply to FTBoomer
For those of you using the Asus RT-N56U router there is another update to the custom firmware that is now available. I'm running it now and so far extremely stable. As always it comes with the usual disclaimer - use at your own risk as with all firmware updates there is that risk of bricking your device so follow the instructions carefully!

»code.google.com/p/rt-n56u/downlo···ps32.zip

ASUS RT-N56U custom firmware 1.0.1.7f-p9 from Padavan

Changes from original firmware 1.0.1.7f:

- Build optimization for MIPS32 -code more fast and smaller-.
- Added full support for Optware -start/stop scripts is embedded-.
- Added NFS server v3 with WebGUI control. NTFS/FAT32/EXT2/EXT3 exports supported.
- Added SSH server -dropbear-0.52- with WebGUI control. SSH access from WAN supported.
- Added ability to WAN/USB Modem/Routes settings changes without router reboot.
- Added fast WAN source switching to USB Modem without router reboot.
- Added ability for VLAN filtering Internet/IPTV/VoIP without create LAN-WAN bridges.
- Fixed DHCP client for PPPoE WAN connection. PPPoE Dual Access now worked perfectly.
- Fixed L2TP WAN connection in auto mode. VPN heart-beat server now resolved by name.
- Fixed Dual Access PPTP WAN auto-reconnection after broken PPP tunnel -DNS bug-.
- Fixed missing NAT MASQUERADE for physical WAN interface, when WAN IP and routes is static.
- Fixed broken IPTV after physical WAN interface new lease obtained -by DHCP-.
- Fixed loading more instances of L2TP daemon.
- Fixed more zombie for "pppd" process and others.
- Fixed LAN DHCP server bug -no leases- when DHCP pool end address - xxx.xxx.xxx.11.
- Fixed earlier physical WAN interface up on router startup -spoofing issue-.
- Fixed iptables filter rules for port forwarding on router's LAN IP via VirtualServer.
- Fixed casual DNS Relay dead.
- Fixed DNS Relay logic for reverse lookup requests for local IP's. Now all this requests fast forwarded from LAN DHCP leases, without requesting from WAN ISP DNS.
- Fixed work IPTV UDP-HTTP Proxy with disabled setting "Enable multicast routing". Now udpxy work without igmpproxy.
- Fixed broken HW_NAT after enabled WiFi "Multicast rate".
- Fixed broken HW_NAT after enabled "L2TP Passthrough" and "IPSec Passthrough".
- Fixed "MAN" static routes loading after disabled static route.
- Both WiFi "Multicast rate" now enabled by default -HTMIX mode-.
- Added WiFi 2.4GHz legacy "Multicast rate" modes.
- Added independent IGMP Snooping control for WiFi. Now WiFi IGMP Snooping enabled by default and dropped all outside multicast traffic.
- Added ability for WiFi region change from WebGUI.
- Fixed WiFi scheduler stupid time overlap check.
- Fixed Telnet server start/stop issues.
- Fixed local network scanner background utility.
- Fixed UPnP Mediaserver force rescan after startup -minidlna new switch "-U" instead of "-R"-.
- Fixed all Russia timezones.
- Fixed some Russian resources for WebGUI.
- Fixed Samba write issue from MacOS clients.
- Fixed broken setting "No Encryption" for WAN PPTP property.
- Added ability for rebind WPS button actions -short and long press-. 8 custom actions is allowed -e.g. WiFi radio on/off, safe removal USB, reboot, etc-.
- Added ability to manual settings physical WAN Ethernet link.
- Added advanced settings for Ethernet switch.
- Added second manual DNS IP for DHCP server.
- Added ability to change source media path for UPnP and iTunes Mediaservers.
- Added fdisk -busybox applet- for partitioning drives from Telnet console.
- Added mke2fs -mkfs.ext2, mkfs.ext3- for making EXT2/EXT3 partitions from Telnet/SSH console.
- Added several Linux utils -such as dd, env, blkid, ip, sysctl, more, ...-.
- Added terminfo database for correct terminal keys handling -e.g. for MC-. xterm by

default.
- Added USB modem ZTE-MF180.
- Added output second -physical- WAN IP address in WebGUI -WAN status-.
- Added output MAC address as text in WebGUI -LAN clients table-.
- Added physical WAN Ethernet link info in WebGUI -WAN status-.
- Added WAN authentification for ISP KABiNET.
- Added USB HDD spindown after safely remove from WebGUI.
- Added firmware subversion info to WebGUI.
- Updated kernel module Ralink raeth -RT3662 wired GMAC/GMAC2-. Increased TX/RX ring

buffers up to 512
-tx_ring_full workaround-.
- Updated kernel module Ralink Ralink RT3090_ap -WiFi 2.4 GHz-. Added WiFi MAC verification to syslog.
- Updated kernel module Ralink Ralink rt2860v2_ap -WiFi 5 GHz-. Added WiFi MAC verification to syslog.
- Update all USB subsystem and drivers in Linux kernel.
- Updated busybox to v1.19.3
- Updated pppoe-relay to v3.10.
- Updated igmpproxy to v0.1-stable.
- Updated udpxy to v1.0-21.1.
- Disabled self-reboot after CPU overload.
- Disabled buggy Web redirect page -after internet connection lost-.
- Disabled buggy WAN speed auto measurement after WAN up.
- Deleted some national resources -needed more space in NOR Flash-.

Changes from previous firmware 1.0.1.7f-p8:

- Fixed very serious NTFS bug.
- Fixed WiFi AP 5GHz status for more one connected client.
- Added WAN authentification for ISP KABiNET.
- WiFi region code now obtained from NVRAM variable "wl_country_code" -instead of EEPROM-.

Changes from firmware 1.0.1.7f-p7:

- Added some new WPS button actions.
- Added ability for WiFi region change from WebGUI.
- Added USB HDD spindown after safely remove from WebGUI.
- Added auto changing home dir on optware start/stop.
- Added ssh client into dropbear. Now dropbear used path /opt/libexec/sftp-server for

external sftp.
- Added Flow Control option -Ethernet switch- for each port.
- Updated kernel module Ralink raeth -RT3662 wired GMAC/GMAC2-.
- Increased TX/RX ring buffers up to 512 for Ralink raeth module -tx_ring_full workaround-.
- Updated kernel module Ralink Ralink RT3090_ap -WiFi 2.4 GHz-. Added WiFi MAC verification

to syslog.
- Updated kernel module Ralink Ralink rt2860v2_ap -WiFi 5 GHz-. Added WiFi MAC verification

to syslog.
- Update all USB subsystem and drivers in Linux kernel.
- Updated busybox to v1.19.3
- Fixed disabled WiFi WMM combobox on AP in Auto mode.
- Fixed Samba write issue from MacOS clients.
- Fixed broken setting "No Encryption" for WAN PPTP property.

01/16/2011
Padavan

--
~All truth goes through three phases. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as self-evident. - Arthur Schopenhauer ~


ispalten

join:2005-04-16
Clermont, FL
kudos:1
Gary, what about ASUS's new release, 1.0.1.8B (»support.asus.com/Download.aspx?S···11&s=2)? OK or stay away from it.

Why should an 'average' user want to use the custom one??? What is the gain?

Will it void any warranty?

Irv S.
--
Irv Spalten


BHNtechXpert
BHN Staff
Premium,VIP
join:2006-02-16
Saint Petersburg, FL
kudos:153
You will notice I said use at your own risk. This firmware is better than the stock.


jajohn

@rr.com
reply to ispalten
Be aware that the Russian firmware does not include the media server as part of the normal update firmware process. To add the media server you must go back to the web site and follow the instructions there to add media server. Unfortunately (for me at least) the instructions are not simple enough. You must have in depth technical knowledge of which of many files to download, install, and modify before you can get media server functionality.

If someone here (Gary?) could simplify which instructions to follow I would like to try, since I installed the firmware update and found it to be stable and fast. Unfortunately I use the media server with my WD box to display photos and videos from my library on the TV.

John


BHNtechXpert
BHN Staff
Premium,VIP
join:2006-02-16
Saint Petersburg, FL
kudos:153
reply to FTBoomer
Very good point. I'll try to work on that tonight for you guys and thanks for the feedback.

Can you post back the link to the current instructions (save me a bit of time tracking it down).


jajohn

@rr.com
Thanks for checking it out.

»code.google.com/p/rt-n56u/wiki/MediaServer

John


BHNtechXpert
BHN Staff
Premium,VIP
join:2006-02-16
Saint Petersburg, FL
kudos:153
reply to FTBoomer
Okay now you are using p10 of the firmware. P9 still has them included which is the version I mentioned above. I have not tested P10 yet to be honest with you. P10 appears to fix a few things...let me review the list see what the advantages to P10 over 9 are. And yes you are correct...those instructions are not intended for the faint of heart and lengthy. In all honesty that will take at least a day or two to hash out.
--
~All truth goes through three phases. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as self-evident. - Arthur Schopenhauer ~



BHNtechXpert
BHN Staff
Premium,VIP
join:2006-02-16
Saint Petersburg, FL
kudos:153
reply to FTBoomer
P10 appears to fix several things and improve overall router speed in a number of areas so I'm going to test it over the next 36 hours or so and if things look good will share it here with the changelog. The key thing to remember is if you go to P10 and want to use the media server you will have additional work ahead of you whereas P9 still retains the media server functionality.

jj31234

join:2011-07-29
Wesley Chapel, FL
(originally posted as jajohn)

Running on P9 with no problems whatsoever. Stable and fast. Media Player runs fine.

Just as a note, I tried the latest Asus firmware (1018b version) and it also was stable but not as fast as P9. One interesting note is that my wife reported hearing strange noises in the closet (where the router and USB disk is kept). Upon investigation (I can't hear for beans) it turned out that the router was continually polling the USB drive, not allowing it to spool down). I went back to 1017f and it behaved normally (spooled down). Just an observation.

I await your feedback on P10 media server since I like to play around but am technically obsolete and really don't feel like learning all about media servers to figure it out myself.

Thanks again.

John


BHNtechXpert
BHN Staff
Premium,VIP
join:2006-02-16
Saint Petersburg, FL
kudos:153
reply to FTBoomer
Funny you should say that because I'm still running p9 and was thinking it isn't as fast as p7. Tell me how you are gauging speed in this case.

jj31234

join:2011-07-29
Wesley Chapel, FL
Since I have never run P7 I am unable to compare speed, but compared to 1017f I find that my average download speed is higher (average 27 using BHN speed test) on P9 while on 1017f I used to get average of 23-24). VERY simplistic I know. If you have a more controlled method of comparing speed I am willing to run some tests and send you the results.


BHNtechXpert
BHN Staff
Premium,VIP
join:2006-02-16
Saint Petersburg, FL
kudos:153
Tell ya what.. I'm headed home in just a few minutes and I'll do some real in depth tests and see how she goes with p10. Now you have me curious


BHNtechXpert
BHN Staff
Premium,VIP
join:2006-02-16
Saint Petersburg, FL
kudos:153
reply to FTBoomer
Okay I am on P10 now and so far I'm loving it. Faster than P9 in GUI response and my wan to lan speeds are exactly where I expect them to be. One thing I did notice in playing for just a couple of minutes only enable HW NAT for LAN and not Wireless/Lan because for whatever reason it does slow things down there....that I noticed right off the bat. More info to come as I play


BHNtechXpert
BHN Staff
Premium,VIP
join:2006-02-16
Saint Petersburg, FL
kudos:153
reply to FTBoomer
This is about as perfect as it gets folks....god I love my Lightning service

»mcs.ispgeeks.net/myspeed/db/report?id=669086


BHNtechXpert
BHN Staff
Premium,VIP
join:2006-02-16
Saint Petersburg, FL
kudos:153
reply to FTBoomer
Just an update... P10 alternate RTN56U firmware continues to run great with no issues so far. Understand you will lose the media streaming capability in P10 unless you manually re-install it which is a major PIA to say the least. For those who don't care about it...nice firmware.

jj31234

join:2011-07-29
Wesley Chapel, FL
Just wondering if you have had the time to figure out how to add the media server back into Padavan firmware. I am running P9 with no problems but would love to play with the newer releases.

Thanks

John


BHNtechXpert
BHN Staff
Premium,VIP
join:2006-02-16
Saint Petersburg, FL
kudos:153
No sir... have been EXTREMELY busy and that fun stuff honestly has to take a back burner for the moment. I reviewed everything there and that is seriously an advanced task...meaning from the teaching standpoint.

jj31234

join:2011-07-29
Wesley Chapel, FL
No problem.......have a great day!

John


BHNtechXpert
BHN Staff
Premium,VIP
join:2006-02-16
Saint Petersburg, FL
kudos:153
reply to FTBoomer
There are two new versions of firmware the most recent released today. I'm going to test the Feb 8 release (p11) right now and give the other a day or two to mature.


BHNtechXpert
BHN Staff
Premium,VIP
join:2006-02-16
Saint Petersburg, FL
kudos:153
reply to FTBoomer
Actually I take that back.. going to run with latest which is 1.0.1.8d-p3

ASUS RT-N56U custom firmware 1.0.1.8d-p3 from Padavan

Changes from original firmware 1.0.1.8d:

- Build optimization for MIPS32R2 -code more fast and smaller-.
- Changed firmware structure to ROOTFS_IN_FLASH. Router loading now >2x times faster.
- Added full support for Optware -start/stop scripts is embedded-.
- Added NFS server v3 with WebGUI control. NTFS/FAT32/EXT2/EXT3 exports supported.
- Added SSH server -dropbear-0.52- with WebGUI control. SSH access from WAN supported.
- Added DDNS client inadyn-1.96.3.
- Added PPTP VPN Server pptpd-1.3.4-5 with user-friendly control via WebGUI.
- Replaced linux-igd -NAT UPnP- service by the more powerful IGD miniupnpd-1.6.
- Replaced udhcpc -DHCP client- service by the more newer udhcpc from busybox-1.19.3.
- Added ability to WAN/USB Modem/Routes settings changes without router reboot.
- Added instant WAN source switching to USB Modem and back without router reboot.
- Added ability for VLAN filtering Internet/IPTV/VoIP without create LAN-WAN bridges.
- Fixed DHCP client for PPPoE WAN connection. PPPoE Dual Access now worked perfectly.
- Fixed L2TP WAN connection in auto mode. VPN heart-beat server now resolved by name.
- Fixed Dual Access PPTP WAN auto-reconnection after broken PPP tunnel -DNS bug-.
- Fixed missing NAT MASQUERADE for physical WAN interface, when WAN IP and routes is static.
- Fixed broken IPTV after physical WAN interface new lease obtained -by DHCP-.
- Fixed more zombie for "pppd" process and others.
- Fixed earlier physical WAN interface up on router startup -spoofing issue-.
- Fixed iptables filter rules for port forwarding on router's LAN IP via VirtualServer.
- Fixed work IPTV UDP-HTTP Proxy with disabled setting "Enable multicast routing". Now udpxy work
without igmpproxy.
- Fixed broken HW_NAT after enabled WiFi "Multicast rate".
- Fixed broken HW_NAT after enabled "L2TP Passthrough" and "IPSec Passthrough".
- Fixed "MAN" static routes loading after disabled static route.
- Both WiFi "Multicast rate" now enabled by default -HTMIX mode-.
- Added WiFi legacy "Multicast rate" modes.
- Added independent IGMP Snooping control for WiFi. Now WiFi IGMP Snooping enabled by default
and dropped all outside multicast traffic.
- Added ability for WiFi region change from WebGUI.
- Fixed WiFi scheduler stupid time overlap check.
- Fixed Telnet server start/stop issues.
- Fixed local network scanner background utility.
- Fixed all Russia timezones.
- Fixed some Russian resources for WebGUI.
- Fixed Samba write issue from MacOS clients.
- Fixed broken setting "No Encryption" for WAN PPTP property.
- Fixed abnormal periodical DDNS update bug -every 15 seconds-.
- Fixed updating files /etc/passwd and /etc/group after every Samba and FTP server restart.
- Added ability for rebind WPS button actions -short and long press-. 9 custom actions is allowed
-e.g. WiFi radio on/off, safe removal USB, reboot, etc-.
- Added ability to manual settings physical WAN Ethernet link.
- Added ability for change USB modem port speed, port speed select increased up to 4Mbps.
- Added advanced settings for Ethernet switch.
- Added second manual DNS IP for DHCP server.
- Added ability for input host name in DHCP server reservation table.
- Added ability for Enabled/Disabled HW_NAT from WebGUI.
- Added ability for changing maximum NAT connection and show current connections count from WebGUI.
- Added fdisk -busybox applet- for partitioning drives from Telnet console.
- Added mke2fs -mkfs.ext2, mkfs.ext3- for making EXT2/EXT3 partitions from Telnet/SSH console.
- Added several Linux utils -such as tcpdump, dd, env, blkid, ip, sysctl, more, ...-.
- Added terminfo database for correct terminal keys handling -e.g. for MC-. xterm by default.
- Added support for handling Linux swap partition.
- Added USB modem ZTE-MF180.
- Added 11g/n Mixed mode for Wi-Fi 2.4GHz.
- Added Software FastNAT kernel module from wive-rtnl project.
- Added adaptive LCP echo interval -lcp-echo-adaptive- for WAN PPPoE/PPTP/L2TP in WebGUI.
- Added output second -physical- WAN IP address in WebGUI -WAN status-.
- Added output MAC address as text in WebGUI -LAN clients table-.
- Added physical WAN Ethernet link info in WebGUI -WAN status-.
- Added ability for update up to 3 DDNS domain names from one DDNS service.
- Added WAN authentification for ISP KABiNET.
- Added WAN authentification mode 802.1x EAPoL-MD5.
- Added USB HDD spindown after safely remove from WebGUI.
- Added ability for change administrator login name in WebGUI.
- Added small storage partition -handled to /etc/storage- for storing user scripts, keys in SPI Flash.
- Updated kernel module Ralink raeth -RT3662 wired GMAC/GMAC2-. Increased TX/RX ring buffers up to 512
-tx_ring_full workaround-. Ethernet TX packets now padding to 60+4 bytes.
- Updated kernel module Ralink Ralink RT3090_ap -WiFi 2.4 GHz-. Added WiFi MAC verification to syslog.
- Updated kernel module Ralink Ralink rt2860v2_ap -WiFi 5 GHz-. Added WiFi MAC verification to syslog.
- Apply patches for kernel nf_conntrack modules -for HW_NAT environment-.
- HW_NAT Foe Table Size increased to maximal RA_HW_NAT_TBL_16K -16384 records-.
- Enabled NAPI -RX poll- for Ralink raeth kernel module -RT3662 wired GMAC/GMAC2-.
- Updated USB kernel drivers.
- Updated busybox to v1.19.3
- Updated dnsmasq to v2.59.
- Updated pppoe-relay to v3.10.
- Updated igmpproxy to v0.1-stable.
- Updated udpxy to v1.0-21.1.
- Updated e2fsprogs to v1.41.14.
- Updated Samba server to v3.0.37.
- Updated pptp.so plugin for pppd -from accel-pptp-.
- Updated rp-pppoe.so plugin for pppd.
- Updated L2TP client rp-l2tp to v0.5-rtn.
- Updated pppoe, pppol2tp, pptp kernel drivers.
- Disabled self-reboot after CPU overload.
- Disabled ugly Web redirect page -after internet connection lost-.
- Disabled ugly WAN speed auto measurement after WAN up.
- Removed minidlna -UPnP mediaserver- package whith ton libraries -needed more space in NOR Flash-.
- Removed obsolete and broken mt-daapd-0.2.4.2 and mDNSResponder.
- Removed some national resources -needed more space in NOR Flash-.

Changes from firmware 1.0.1.8d-p2:

- Updated pppol2tp kernel driver to v0.18.3 from wl500g project.
- Disabled HW_NAT reentry packets debug messages to syslog.
- Added ability to enable/disable ALG for H.323 and SIP protocols.
- Added ability to for enable/disable context help on WebGUI.
- Added 11g/n Mixed mode for Wi-Fi 2.4GHz.
- Fixed PPPoE auto-reconnect issue -1.0.1.8d-p2 bug-.
- Fixed login name instant change issue.
- Fixed ugly syslog messages such as "miniupnpd[pid]: [truncated] m".
- Fixed IGD UPnP compatible issue from Windows Home Server 2011.
- Fixed DDNS page issue for browsers Firefox/Chrome.
- Fixed disabled DNS control on manual WAN IP for WAN PPPoE/PPTP/L2TP.
- Always show submenu "Advanced Settings" on WebGUI.

Changes from firmware 1.0.1.8d-p1:

- Added ability for change USB modem port speed, port speed select increased up to 4Mbps.
- Added handling resolve host names, from manual DHCP reservation list.
- Replaced PPTP VPN server to accel-pptpd version -kernel mode-. PPTP VPN connection more times faster.
- Updated pptp.so plugin for pppd -from accel-pptp-.
- Updated rp-pppoe.so plugin for pppd.
- Updated L2TP client rp-l2tp to v0.5-rtn.
- Updated pptp and pppoe kernel drivers.
- Increased PPP lcp-echo-interval to 15s for prevent drop PPPoE/PPTP/L2TP connection on ISP server overload.
- Added adaptive LCP echo interval -lcp-echo-adaptive- for WAN PPPoE/PPTP/L2TP in WebGUI.
- Added Software FastNAT kernel module from wive-rtnl project. FastNAT helps packets pass through netfilter
faster when a packet is an established or reply traffic. It is useful for WAN PPTP/L2TP.
- Added ability for update up to 3 DDNS domain names from one DDNS service.
- Added ability for change administrator login name in WebGUI.
- Added "Clone MAC" button on WebGUI WAN page.
- Fixed HW_NAT reentry packets issue for combined LAN/Wi-Fi offload mode.
- Fixed start 3G USB modem Solomon S3Gm-660 for case modem device Auto.
- Fixed delete static IP addresses on WebGUI WAN page after change WAN type.
- Fixed PPTP VPN server connect issue for case manual DNS1 on DHCP Server page.
- Fixed skip DDNS update after manual update from WebGUI.
- Fixed WAN down after start remote firmware update from WAN.
- Fixed WAN DHCP update issue after change Ethernet link state -fw 1.0.1.8d bug-.
- Update "cpu" utility.

Changes from firmware 1.0.1.7f-p11:

- All patches cumulative migrated to new firmware 1.0.1.8d.
- Added PPTP VPN Server pptpd-1.3.4-5 with user-friendly control via WebGUI.
- Added WAN authentification mode 802.1x EAPoL-MD5 for WAN type Static/Authomatic IP.
- Added ability for switch SSH server to access mode only by authorized_keys.
- Added ability for input host name in DHCP server reservation table.
- Added support for handling Linux swap partition.
- Added console utility tcpdump-4.1.1.
- Added custom user script /etc/storage/post_iptables_script.sh, called after internal firewall update.
- Added custom user script /etc/storage/post_wan_script.sh, called after WAN up/down.
- Enabled NAPI -RX poll- for Ralink raeth kernel module -RT3662 wired GMAC/GMAC2-.
- Updated Samba server to v3.0.37 and more decreased binary size.
- Updated IGD miniupnpd to v1.6.20120207.
- Fixed safely removal USB Modem function via WebGUI.
- Fixed instant WAN switch to USB Modem and back to WAN for WAN type Static/Authomatic IP.
- Removed obsolete and broken mt-daapd-0.2.4.2 and mDNSResponder.
- Removed ugly Asus EzQoS and QoS from Linux kernel. Linux QoS available via tc rules from terminal.

Changes from firmware 1.0.1.7f-p10:

- Fixed bug in DHCP client under ISP Beeline -cannot obtain DHCP lease for physical WAN interface-.
- Fixed bug 3G modem switch from CD-ROM emulation mode.
- Increased timeout for waiting 3G modem at router start.
- Fixed usage static DNS instead of PPP dynamic DNS for 3G modems, if WAN type = Static IP.
- Added ability for dual-access to ISP LAN and Internet at using 3G modem. NOTE: dual-access allowed
only for WAN type = PPPoE/PPTP/L2TP.
- Added independed region code for WiFi 2.4/5GHz. Region code moved to tab "Wireless - Common" for both
WiFi interfaces. Now region code selectable from combobox.
- Changed modes "Multicast rate" for both WiFi interfaces. Default multicast rate HTMIX/MCS=1 for 2.4GHz
and HTMIX/MCS=8 for 5GHz. Multicast rate control also copied to tab IPTV.
- Added ability for disable NAT-PMP protocol for NAT-UPnP.
- Added custom user script "/etc/storage/start_script.sh" for system tune at start router.
- Added patch on mt-daapd -"msup"=1- for resolve bug with new versions iTunes.
- Mode "Hardware NAT for LAN and WiFi" labeled as Experimental mode.
- Fixed WebGUI controls "WMM" and "Channel Bandwidth" for WiFi 5GHz.
- Fixed broken symlink /sbin/shutdown.
- HDD spindown function performed via hdparm v9.37 -instead of sdparm-.
- Try to fix httpd daemon -WebGUI hungup-.
- Changed tune Linux kernel by default -user also can use start_script.sh-:
1- vm.panic_on_oom=0
2- vm.min_free_kbytes=2048

Changes from firmware 1.0.1.7f-p9:

- Changed firmware structure to ROOTFS_IN_FLASH -instead of ROOTFS_IN_RAM-. ROOTFS_IN_FLASH structure has advantages:
1- Router loading more times faster ->2x-, because only linux kernel -not rootfs- extracted into RAM.
2- Available RAM for the system is increased by ~15MB.
- Added DDNS client inadyn-1.96.3 to updating WAN IP for all DDNS servers, exclude AsusDDNS. Added support several
new DDNS servers.
- Replaced linux-igd -NAT UPnP- service by the more powerful miniupnpd-1.6. miniupnpd stored all recieved NAT
forwarding and automatically restored them after service restarting and after internal firewall update.
- Replaced dproxy -DNS relay- and udhcpd -DHCP server- services by the more powerful dnsmasq-2.59. dnsmasq has
intelligent caching DNS Relay and DHCP Server. DNS cache storage used 800 records. dnsmasq support fast DNS
forwarding for local LAN hosts.
- Replaced udhcpc -DHCP client- service by the more newer udhcpc from busybox-1.19.3.
- DHCP client for WAN PPPoE now started in background, without waiting DHCP lease or timeout. WAN PPPoE connection
established now faster, for cases the ISP local subnet has no DHCP, or the ISP local DHCP server give lease only after
PPP connection established.
- Updated e2fsprogs package -create and checking EXT2/3 filesystems-.
- Added ability for changing maximum NAT connection and show current connections count from WebGUI.
- Added ability for Enabled/Disabled HW_NAT from WebGUI.
- Added new "Storage" partition -size 64K- in NOR flash for storing SSH -and others- keys. Partition contents extracted
to /etc/storage. SSH keys is permanent now.
- Fixed casual WebGUI hungup.
- Fixed abnormal periodical DDNS update bug -every 15 seconds-.
- Apply patches for kernel nf_conntrack modules -for HW_NAT environment-.
- HW_NAT Foe Table Size increased to maximal RA_HW_NAT_TBL_16K -16384 records-.
- Updated kernel modules usb-serial.ko and option.ko -3G modems- from firmware 1.0.1.8b.
- Updated 3G modems terminal scripts from firmware 1.0.1.8b.
- Fixed ethernet TX packets padding to 60+4 bytes -from 64+4-. This is resolved IPTV issue for ISP 2KOM -IGMP drop hell-.
- Fixed WAN PPTP option "No Encryption". Now this disabled encryption -nomppe- and compression -nomppc-.
- Fixed updating files /etc/passwd and /etc/group after every Samba and FTP server restart.
- Changing WiFi region code "GB" by default -instead of "DB"- and set for 2.4/5GHz independently.
- Added some Linux kernel tune:
1- Enabled kernel.panic_on_oops. Kernel oops raised auto-restart instead of kernel halt.
2- Increased value vm.min_free_kbytes to 2048.
3- Increased net.netfilter.nf_conntrack_buckets -conntrack hash table- to 65536.
4- Increased timeout net.ipv4.ip_conntrack_tcp_timeout_established to 360.
5- Decreased timeout net.ipv4.ip_conntrack_udp_timeout to 65.
6- Decreased net.ipv4.route.max_size to 16384.
7- Increased net.ipv4.route.gc_elasticity to 2.
- Added /sbin/shutdown symlink for shutdown router from command line.
- Removed minidlna -UPnP mediaserver- package whith ton libraries -libsqlite, libFLAC, libjpeg, libexif,
libogg, libvorbis-. minidlna wasted more space in NOR flash. UPnP mediaserver can be installed from optware.

Changes from firmware 1.0.1.7f-p8:

- Fixed very serious NTFS bug.
- Fixed WiFi AP 5GHz status for more one connected client.
- Added WAN authentification for ISP KABiNET.
- WiFi region code now obtained from NVRAM variable "wl_country_code" -instead of EEPROM-.

Changes from firmware 1.0.1.7f-p7:

- Added some new WPS button actions.
- Added ability for WiFi region change from WebGUI.
- Added USB HDD spindown after safely remove from WebGUI.
- Added auto changing home dir on optware start/stop.
- Added ssh client into dropbear. Now dropbear used path /opt/libexec/sftp-server for external sftp.
- Added Flow Control option -Ethernet switch- for each port.
- Updated kernel module Ralink raeth -RT3662 wired GMAC/GMAC2-.
- Increased TX/RX ring buffers up to 512 for Ralink raeth module -tx_ring_full workaround-.
- Updated kernel module Ralink Ralink RT3090_ap -WiFi 2.4 GHz-. Added WiFi MAC verification to syslog.
- Updated kernel module Ralink Ralink rt2860v2_ap -WiFi 5 GHz-. Added WiFi MAC verification to syslog.
- Update all USB subsystem and drivers in Linux kernel.
- Updated busybox to v1.19.3
- Fixed disabled WiFi WMM combobox on AP in Auto mode.
- Fixed Samba write issue from MacOS clients.
- Fixed broken setting "No Encryption" for WAN PPTP property.


Cisco Kid

@rr.com
Few months back you responded to a request regarding a inexpensive but "Good" wire less Router to Purchase;

"ASUS (RT-N10+) Wireless-N 150 Entry Home Router: Fast Ethernet and support up to 4 Guest SSID(Open source DDWRT support)"

This model has come back in stock at Amazon....includes free Shipping; Love products with free Shipping.....

Your opinion would be Unchanged? Do you feel someone\me....with moderate PC experience; I have downloaded and installed Firmware into DVD Burners, etc....will be able to Flash this Router with DDWRT without "killing" the Router?

Would you just go with the Asus Software? Or go with DDWRT? Is the DDWRT in addition to, or, does it replace the manufacturers installed Software?

Lots of questions, do appreciate your your answers; Thanks


BHNtechXpert
BHN Staff
Premium,VIP
join:2006-02-16
Saint Petersburg, FL
kudos:153
reply to FTBoomer
Cisco nothing has changed there. Obviously I prefer routers with more horsepower but people do like the 16 and yes it does flash DDWRT nicely (again not my choice of firmware but...)

As an update to my last post I'm running the firmware that was released just today and so far so good. The real cool thing is they added a VPN server to the menu option...very nice indeed.


Cisco Kid

@rr.com
16? Is that a code for this Asus Router?

Hmmm....not a Fan of DDWRT? If I were to purchase this RT-N10+, just go with what is installed by Asus...and update the ASUS Firmware?

Just curious; keeping the costs down, which unfortunately is my objective, is there a different Model.....or, for the money....this would be the best way to go. My Lightning wireless Router (Unbee DDW3611) gives me coverage than my old NetGear wireless provided by BHN when I had Tubro...and that Router was Netgears entry low level model.


BHNtechXpert
BHN Staff
Premium,VIP
join:2006-02-16
Saint Petersburg, FL
kudos:153
reply to FTBoomer
Aaack... you really did mean the rt10. I was thinking of the RTN16

And yes I am no fan of DDWRT. Some people swear by it like fruit bitten apple fanbois... I'm not one of them