 EGThe wings of lovePremium join:2006-11-18 Union, NJ kudos:9 | reply to PGHammer
Re: Accokeek, MD said by PGHammer: I now have three-channel upstream (two-channel D2 ATDMA and one DOCSIS 1.x TDMA - likely CMTS issues) as well. That's not an issue. Dissimilar carriers can be bonded. |
|
|
|
 Reviews:
·Comcast
2 edits | reply to Johkal
 Screencap of downstream and upstream status page |
ARRIS WBM-760A finally shows all-green in southern Prince George's County, MD (yes - Accokeek, MD - 20607). I already had four-channel downstream - I now have three-channel upstream (two-channel D2 ATDMA and one DOCSIS 1.x TDMA - likely CMTS issues) as well. Given that I have Performance (not Blast or Ultra) I refuse to quibble. |
|
 1 edit | reply to Johkal
Champaign, IL  Champaign, IL |
|
 1 edit | reply to jford951
Re: Westland, MI Modem did a reboot last night and now I have lost my upstream bonding
It's back now must have been soemthing they were doing |
|
 1 edit | reply to Johkal
Houston, TX Houston, TX |
|
 ronus join:2003-02-09 Dallas, GA 1 edit | reply to Johkal
Dallas, GA Dallas, GA |
|
 NightfallMy Goal Is To Deny YoursPremium,MVM join:2001-08-03 Grand Rapids, MI Reviews:
·Comcast
·Callcentric
·Site5.com
1 edit | reply to Johkal
Grand Rapids, MI Upstream bonding evident in Grand Rapids, MI! |
|
 1 edit | reply to Goober
Atlanta, GA Modem rebooted yesterday after adding Xfinity on Demand to one of my Xboxes, and then I saw those nice blue lights on both send and receive. Modem status confirms upstream bonding here. |
|
 GooberPremium join:2000-12-17 Naperville, IL kudos:5 Reviews:
·Dish Network
1 edit | reply to Johkal
Naperville, IL Naperville, IL has it. I just get two channels bonding though. I've reset several times. Before it went away last time, I had three channels bonding. -- Obama: Architect of the slowest economic recovery since the Great Depression. Awesome. |
|
 1 edit | reply to Johkal
Chesterfield, MI Chesterfield area has it as well. Looks like most of SE michigan should have it. Glad to finally see blue lights again! Now if they could just loosen their grip on powerboost... It was much nicer when everyone wasn't capped at 36/6. |
|
 Reviews:
·WOW Internet and..
·Comcast
1 edit | reply to Johkal
Hazel Park, MI Have it here in Hazel Park Michigan:
Status
Status HW/FW Versions Event Log CM State Advanced
RF Parameters Downstream DCID Freq Power SNR Modulation Octets Correcteds Uncorrectables Downstream 1 2 573.00 MHz 6.90 dBmV 37.09 dB 256QAM 1669260892 89 0 Downstream 2 4 585.00 MHz 6.89 dBmV 37.36 dB 256QAM 1525788851 91 0 Downstream 3 6 597.00 MHz 7.45 dBmV 37.94 dB 256QAM 1492480826 101 0 Downstream 4 7 603.00 MHz 7.31 dBmV 38.26 dB 256QAM 1516831607 105 0 Reset FEC Counters Upstream UCID Freq Power Channel Type Symbol Rate Modulation Upstream 1 10 36.40 MHz 47.00 dBmV DOCSIS2.0 (ATDMA) 5120 kSym/s 64QAM Upstream 3 11 29.50 MHz 46.25 dBmV DOCSIS2.0 (ATDMA) 5120 kSym/s 64QAM Upstream 4 12 24.20 MHz 45.75 dBmV DOCSIS1.x (TDMA) 2560 kSym/s 16QAM
Status System Uptime: 0 d: 21 h: 07 m Computers Detected: staticCPE(1), dynamicCPE(1) CM Status: Telephony-Reg Complete Time and Date: Fri 2012-06-01 14:52:15 |
|
 2 edits | reply to Johkal
Milan, MI I can confirm upload channel bonding here too, Milan, MI 48160...
See also ---> »Milan, MI |
|
 graysonfPremium,MVM join:1999-07-16 Fort Lauderdale, FL | reply to Johkal
Re: Evidence of Upstream Channel Bonding - Post Here |
|
 Reviews:
·Comcast
| reply to Johkal
Roseville, MI I reset my modem and I got 2 blue lights ! Roseville, MI 48066 |
|
 1 edit | reply to Johkal
Alexandria, VA Alexandria, Virginia
Looks like we finally got upstream bonding...noticed the additional blue light on my SB.  |
|
 Reviews:
·Comcast
1 edit | reply to andyross
Jensen Beach, FL It's baaaack. One TDMA and one ATDMA. Jensen Beach, FL.
See also ---> »Jensen Beach, FL |
|
 andyrossPremium,MVM join:2003-05-04 Schaumburg, IL 1 edit | reply to Johkal
Schaumburg, IL Modem lost signal overnight (analog TV was officially deleted today) and bonding is back here in Schaumburg, IL. Even though one of my downstream channels is #8, so far I'm not having any of the issues I did before, probably because the channels are still sequential. |
|
 DrDeke join:2004-05-18 Ypsilanti, MI 1 edit | reply to Johkal
Ypsilanti, MI Ypsilanti [Twp], MI 48197
It's baaaaaaaa-aaaaack... sort of. Last year, had 2 QAM64 and 1 QAM16, then dropped back to 1 QAM64. Came home from vacation today and, without power cycling, got 1 QAM64 and 1 QAM16. (I power cycled after noticing it, and it stayed the same.) |
|