SmuuthTanstaafl Premium Member join:2001-03-22 Aurora, CO 1 edit |
to Johkal
Aurora, CO |
|
FFH5 Premium Member join:2002-03-03 Tavistock NJ 1 edit |
to Johkal
Mullica Hill, NJMullica Hill, NJ
Upstream powerboost now consistently gets around 5 mbps, where before upstream channel bonding it was in mid 3 mbps range. My service is the Performance tier and on large downloads and uploads always settles in on the 16/2 mbps service they are using in this area. Mod Note: See also ---> » Mullica Hill, NJ |
|
scooby Premium Member join:2001-05-01 Schaumburg, IL |
to Johkal
Schaumburg, ILGot it about 10 days ago here in the Northwest Chicago burbs. On Business class 22/5. |
|
Zenit_IIfxThe system is the solution Premium Member join:2012-05-07 Purcellville, VA ·Comcast XFINITY
1 edit |
to Johkal
Loudoun County, VA Channels & Signal Levels | | |
They have been turning on and off upstream channel bonding here in Loudoun County, VA for the past week, but now it looks like its on for good. I have 3 channels bonded now instead of just 2. Signal levels are still horrible, though. The drop to the house is most likely original to the house, buried in late 1994. No sign of it ever being replaced. For 2 months, signal levels on the downstream were -4 or -5db, then all of a sudden changed to the poor levels. |
|
your moderator at work
hidden :
|
Oregonian Premium Member join:2000-12-21 West Linn, OR 2 edits |
to Johkal
West Linn, OR |
|
SunnyRuns from Clowns
join:2001-08-19 |
to Zenit_IIfx
(topic move) Technical Discussion of Upstream Channel BondingModerator ActionThe post that was here (and all 5 followups to it), has been moved to a new topic .. » Technical Discussion of Upstream Channel Bonding |
actions · 2012-May-15 10:09 am · (locked) |
cp Premium Member join:2004-05-14 Wheaton, IL |
cp to Johkal
Premium Member
2012-May-15 11:13 pm
to Johkal
Chicago, IL 60625 Comcast Upstream Bonding |
Just moved to the Ravenswood Area of Chicago and I have upstream bonding!!! Wahoo! |
|
2 edits |
to Johkal
Germantown, MDGermantown, MD Happened about 2 weeks ago. Edit: Interestingly I don't see increased upload speeds from pre to post channel bonding. |
|
SeattleMattStreaming Tech Director Premium Member join:2001-12-28 Seattle, WA |
Wilmington, DE - (At least 2 Upstream LIVE)Looks like multiple upstream channel bonding is live in Wilmington, DE
At my partner's business on Rte. 52 and now have 2 upstream (1 64QAM (293 Hz), 1 16QAM (219 Hz)) showing on his SMC D3 business gateway. I'm not sure if the SMC D3 will show 3.
Still have 4 downstream - but can tell there are now more than 4 as they skip some frequencies. |
|
1 edit |
to Johkal
Charleston, SCCharleston, South Carolina |
|
|
to Johkal
Savannah, GA |
|
Vorticon Premium Member join:2000-08-24 Fruitland Park, FL 2 edits |
to Johkal
Re: Evidence of Upstream Channel Bonding - Post Here
Lake County, Florida, as of today.
|
|
Netgear CM2000 (Software) pfSense Asus RT-AX86
|
to Johkal
Niles, MINiles, MI 49120 - Went from 1 upstream to 3 sometime in the last week. Speeds are no different, though. |
|
1 edit |
to Johkal
Oolitic, IN Oolitic, Indiana |
Oolitic, Indiana Noticed an extra blue light on my modem. |
|
jkj860The Final Frontier join:2002-01-10 Valparaiso, IN 1 edit |
to Johkal
Valparaiso, IN |
|
|
to Johkal
Joliet, IL |
|
jaynicklit up Premium Member join:2001-02-06 Sterling Heights, MI |
to Johkal
Sterling Hts, MIHad it last week for 1/2 day and went away, now it's back, hope it sticks. |
|
neufuse join:2006-12-06 James Creek, PA 1 edit |
to Johkal
Indiana, PAwent 8 down and 2 up last night (i only have 4 since i have a SB6120 but 8 down channels are now available) |
|
2 edits |
to Johkal
Fort Lauderdale, FLFORT LAUDERDALE Just got upgraded from 1 to 2 upstream bonding channels here in fort lauderdale. Already got 8 downstream months ago. |
|
rw123 Premium Member join:2004-01-16 Indianapolis, IN 2 edits |
to Johkal
Indianapolis, INJust got 2 up channels, second is 16qam, up is a little slower actually (hmmm) but I will check again later in the day. Indianapolis, IN 46214 See also ---> » Indianapolis, IN |
|
jay608Going Nucking Futs join:2007-01-22 Homewood, IL (Software) pfSense Netgear CM1000 Zoom 5341J
1 edit |
to Johkal
Bridgeport, ILBonding back in Bridgeport area. |
|
arrakis74 Premium Member join:2004-04-12 Chatham, IL Asus RT-AC87 ARRIS SB8200
|
to Johkal
Chatham, ILIt's back! I had it for a bit last summer, then it came back last night! |
|
|
to Johkal
Ann Arbor, MI 48103 Ann Arbor, MI 48103 4x3 Channels Bonded |
Had some midnight outages last week, rebooted the modem today and had 3 upstream channels. |
|
|
WoofieInPC Premium Member join:2009-04-04 Panama City, FL 2 edits |
to Johkal
Panama City Beach FLExcellent, I've got 2 channels US as of this morning, in Panama City Beach FL on Performance Tier Mod Note: See previous ---> » Panama City Beach, FL |
|
dekipp join:2001-08-08 Manassas, VA 1 edit |
to Johkal
Manassas, VAVirginia Manassas Blast Service 25/4 |
|
WoofieInPC Premium Member join:2009-04-04 Panama City, FL 1 edit |
Side NoteI'm a tick confused re the mod note. I had lost the US bonding from the previous post as many of us had, and just got it back. Is that still considered a dupe post? |
actions · 2012-May-25 11:44 am · (locked) |
SunnyRuns from Clowns
join:2001-08-19 2 edits
1 recommendation |
Sunny
2012-May-25 4:13 pm
The mod edits are intended to cross reference related posts. This has been done numerous times throughout this topic when posts appear for an area which has already been linked in the first post. Examples: » Clovis, CA» Oakland, CA» Valparaiso, IN» Ukiah, CA» Redwood Valley, CA» Sacramento, CA» Sacramento, CADuplicate posts are generally just deleted. The cross referencing would not have been needed, however, had you found your original post and replied by clicking the small reply button at the bottom right on that post each time you wanted to make an update to your report. That way, from your original post and onward would have become a subtopic. Hence, cross referencing would not have been needed. |
actions · 2012-May-25 4:13 pm · (locked) |
|
wayne1605 to Johkal
Anon
2012-May-26 6:23 am
to Johkal
Re: Evidence of Upstream Channel Bonding - Post HereCable Modem Status Signal Addresses Configuration Logs Help This page provides information about the current upstream and downstream signal status of your Cable Modem.
--------------------------------------------------------------------------------
Downstream Bonding Channel Value Channel ID 3 1 2 4 Frequency 663000000 Hz 651000000 Hz 657000000 Hz 669000000 Hz Signal to Noise Ratio 36 dB 37 dB 37 dB 38 dB Downstream Modulation QAM256 QAM256 QAM256 QAM256 Power LevelThe Downstream Power Level reading is a snapshot taken at the time this page was requested. Please Reload/Refresh this Page for a new reading 4 dBmV 5 dBmV 4 dBmV 5 dBmV
Upstream Bonding Channel Value Channel ID 3 2 1 Frequency 22600000 Hz 27900000 Hz 34800000 Hz Ranging Service ID 4999 4999 4999 Symbol Rate 2.560 Msym/sec 5.120 Msym/sec 5.120 Msym/sec Power Level 30 dBmV 31 dBmV 32 dBmV Upstream Modulation [3] QPSK [2] 16QAM [3] QPSK [3] 64QAM [3] QPSK [3] 64QAM
Ranging Status Success Success Success
Signal Stats (Codewords) Bonding Channel Value Channel ID 3 1 2 4 Total Unerrored Codewords 38144503 38145153 38145330 38144892 Total Correctable Codewords 44 0 0 0 Total Uncorrectable Codewords 868 570 536 539
--------------------------------------------------------------------------------
Status | Signal | Addresses | Configuration | Logs | Help
© Copyright 1997-2008 |
|
mike5026 Premium Member join:2007-09-30 Rockford, IL 1 edit |
to Johkal
Rockford, ILRockford, IL
|
|