| reply to Johkal
Re: Evidence of Upstream Channel Bonding - Post Here I had many channels before, but now a single downstream and upstream channel in Houston, TX (Cypress area, which is NW Houston if that matters)
Any reason this would have gone to a single channel? Speeds are still the same as they were before though... |
|
 sortofageekNot TroublePremium,Mod
join:2001-08-19
There & Then
kudos:14 | reply to Johkal
(topic move) It seems we lost upstream channel bonding in HuntsvModerator Action
The post that was here (and all 2 followups to it), has been moved to a new topic .. »It seems we lost upstream channel bonding in Huntsville, AL |
actions · 2012-Dec-18 2:04 pm · (locked) |
1 edit | reply to Johkal
Hudson, WI Hudson, WI -- 3 x 64QAM Channels? |
|
firehazemtfind em hot, leave em wetPremium
join:2001-02-08
Monroe, LA | reply to Johkal
Re: Evidence of Upstream Channel Bonding - Post Here Monroe, La 71201 |
|
andyrossPremium,MVM
join:2003-05-04
Schaumburg, IL | reply to aerobee
said by aerobee :Hudson, WI -- 3 x 64QAM Channels?
Maybe they have found your upstream is clean enough to allow 64QAM on the lowest frequency. |
|
 telcodad
join:2011-09-16
Lincroft, NJ
kudos:2 | said by andyross:said by aerobee :Hudson, WI -- 3 x 64QAM Channels?
Maybe they have found your upstream is clean enough to allow 64QAM on the lowest frequency. There was a previous post from Tobin  in Hillsborough/San Mateo, CA that showed three 64QAM channels plus a 16QAM one: »Hillsborough/San Mateo, CA
Squeezing 4 QAM carriers into the upstream is a big challenge, see: »4 Upstream Channels |
|
| reply to gsxxr1300
Re: West Palm Beach, FL Had a recent change for the better on bonding channel 2.... |
|
 whamelbillhamel DOT netPremium
join:2002-05-09
Hinsdale, IL
kudos:8
 ·AT&T U-Verse
 ·Comcast
2 edits | reply to Johkal
Hattiesburg, MS
Upstream Channel Bonding - Hattiesburg, MS |
I have 2 internet connections, my Arris Telephony modem shows upstream channel bonding. However my other connection running a DOCSIS 3.0 UBEE-DDM3513 does not sync 2 channels, only one. --
Bill - Hattiesburg, MS - »www.billhamel.net |
|
andyrossPremium,MVM
join:2003-05-04
Schaumburg, IL | Your upstream levels are high. From what was posted, it's OK for 2-stream. Your other modem may have worse signals.
1-stream max = 58dB
2-stream max = 54dB
3+stream max = 51dB |
|
whamelbillhamel DOT netPremium
join:2002-05-09
Hinsdale, IL
kudos:8 Reviews:
·AT&T U-Verse
·Comcast
| said by andyross:Your upstream levels are high. From what was posted, it's OK for 2-stream. Your other modem may have worse signals.
1-stream max = 58dB
2-stream max = 54dB
3+stream max = 51dB
Are you talking to me, b/c my power levels are 49.5 and 48 dBmV, and both connections are maxing out at advertised speeds. »stage.results.speedtest.comcast.···1562.png
As for the other modem, I connected to it and the signals are literally almost identical. so, i dont now....
--
Bill - Hattiesburg, MS - »www.billhamel.net |
|
| reply to Johkal
Re: Evidence of Upstream Channel Bonding - Post Here I have a SB6141 and initially got 8 Down/4 Up channels.. but since a recent reboot, I have only been able to get 8 Down/1 Up. Repeated reboots have not changed that. I don't understand what changed now. Based on speed tests, my speed has not been impacted at all though (35 down/5 up). Those are the speeds I consistently get. In the Comcast Sacramento Area now if that helps.. |
|
|
|
1 edit | reply to Johkal
Fresno, CA
bonding |
 my blast 36/6 is consistent though :/ |
|
 SMF
@comcast.net
1 edit | reply to Johkal
Alexandria, VA Alexandria, VA - Performance Tier |
|
Renthal
join:2005-10-16
West Lafayette, IN
1 edit | reply to Johkal
West Lafayette, IN West Lafayette, Indiana |
|
1 edit | reply to Johkal
Berkeley, CA The 16QAM upstream went from a T4 timeout to connected today.
8 Downstream / 4 Upstream Channel Bonding. Same speeds.
Berkeley, CA on a Motorola SB6141 |
|
DanM64
join:2013-01-10
Mokena, IL
1 edit | reply to Johkal
Mokena, IL Mokena, IL
SBG6580 |
|
1 edit | reply to Johkal
Blacksburg, VA Blacksburg, VA
Zoom 5341 |
|
1 edit | reply to Johkal
Louisville, CO SB6120 |
|
1 edit | reply to Johkal
Warren, MI Warren, MI |
|
1 edit | reply to Johkal
Memphis, TN Didnt know until look at the upstream light on my SB6121 and saw it turn Blue. |
|
MadtownPremium
join:2008-04-26
Madera, CA
1 edit | reply to Johkal
Madera, CA Madera, Ca in Parkwood |
|
 santyDon't Follow Me, I'M Lost TooPremium,MVM
join:2001-06-10
Wilmington, IL
kudos:1
1 edit | reply to Johkal
Wilmington, IL Will County, Wilmington, Il. 60481
|
|
1 edit | reply to Johkal
Jonesborough, TN Two bonded QAM-64 upstream carriers
State: Tennessee
City: Jonesborough
Modem/E-MTA: ARRIS TM822G
Subscribed to Blast! 50/10 megabit tier |
|
1 edit | Kane, PA upstream 2 channels in kane, pa 16735 |
|
1 edit | reply to Johkal
Berkeley, CA Four 64QAM upstream? Channel 9 shows both 16QAM and 64QAM.
That is new to my modem stats.
Berkeley, CA on a Motorola SB6141 |
|
Reviews:
 ·VOIPo
·wavebroadband
2 edits | reply to Johkal
Tacoma, WA Tacoma Washington
8 down
2 up
Motorola 6141 |
|
 jbobReach Out and Touch SomeonePremium
join:2004-04-26
Little Rock, AR
1 edit | reply to Johkal
Little Rock, AR Just posted on the 8 channel bonding thread. Looks like I/we got an upgrade about the same time. Now showing 8 channels bonded on the downstream and showing 2 channels on the upstream. Woke up this morning and noticed both the DS and US lights were Blue. Still no speed upgrade as of yet however. |
|
| reply to Johkal
Greenfield, IN Pretty stable 27.5 / 5.5 here. |
|
 your moderator at work
 hidden : Off topic
hidden :
|
