jimdm join:2001-04-22 Muncy, PA |
to Johkal
Muncy, PA Modem | Speedtest |
MUNCY, PA Blast Tier Upstream bonding since Monday |
|
4 edits |
to D P
Roseville, CALooks like I got it in Roseville, CA as well.
Surprised it took so long actually since the north bay has had it almost a year now. Hopefully this means faster upstream speeds are not far behind. I've been thinking about switching to Surewest 15/15 fiber once they install it on our street in place of Comcast Blast tier(25/4-30/5) I'm on now particularly for the extra upload speed but this might convince me to stick around a bit longer :D * edit I did a little more investigating to see if speeds were any different and I noticed a slight drop in ping times using the line quality / ping test tool on this site. Went from upper 80s to lower 80s avg. Was expecting a slightly bigger improvement. The downside is shaper probe now shows I'm no longer getting the 5mbps upstream I was getting before. Now shows being shaped at around 4400kbps instead of 5100kbps consistently :( EX: DiffProbe beta release. October 2009.
Shaper Detection Module.
Connected to server 74.63.50.34.
Estimating capacity:
Upstream: 5829 Kbps.
Downstream: 35851 Kbps.
The measurement will last for about 2.5 minutes. Please wait.
Checking for traffic shapers:
Upstream: Burst size: 8571-8621 KB; Shaping rate: 4480 Kbps.
Downstream: Burst size: 9153-9293 KB; Shaping rate: 31322 Kbps.
For more information, visit: http://www.cc.gatech.edu/~partha/diffprobe
|
|
|
nice |
actions · 2012-Feb-14 10:46 pm · (locked) |
RR ConductorRidin' the rails Premium Member join:2002-04-02 Redwood Valley, CA ARRIS SB6183 Netgear R7000
2 edits
1 recommendation |
to Johkal
Redwood Valley, CACool, we just have 2 channels on the upstream here in the Ukiah area (Mendocino County), 4 on the downstream. Mod Note: See previous report here ---> » Ukiah, CA |
actions · 2012-Feb-15 5:16 am · (locked) |
|
to Johkal
Lincroft, NJThis morning I noticed that my Moto SB6121 modem had rebooted itself overnight, and I now had upstream channel bonding, with 2 new upstream channels added to the original, 36.2 MHz one. The modem's upstream indicator LED is now blue, like the downstream one. So it looks like upstream channel bonding has now arrived in Monmouth County, NJ. |
|
D P join:2000-07-30 2 edits |
to Johkal
Fresno, CAFresno, CA See also ---> » Fresno, CA |
|
D P 1 edit |
to Johkal
Lakewood, CO |
|
DZS join:2007-09-09 York, PA |
to Johkal
Re: Evidence of Upstream Channel Bonding - Post Here Upstream Channel Bonding - York, PA |
It's finally Back in York, PA! |
|
JohkalCool Cat MVM join:2002-11-13 Pennsyltucky |
Johkal
MVM
2012-Feb-20 8:13 pm
3 Upstream channels returned in State College, Pa. |
|
your moderator at work
hidden : hidden : hidden :
|
2 edits |
to Johkal
Burien, WAJust had maintenance on the network from 12-2:30am 2/23/2012 After there were 2 bonded upstream channels. Burien, WA See also ---> » Burien, WA |
|
1 edit |
Finally to Johkal
Anon
2012-Feb-23 2:58 pm
to Johkal
South Sacramento, CA UCID Freq Power Channel Type Symbol Rate Modulation Upstream 1 2 23.70 MHz 49.50 dBmV DOCSIS2.0 (ATDMA) 5120 kSym/s 64QAM Upstream 3 1 30.60 MHz 49.50 dBmV DOCSIS2.0 (ATDMA) 5120 kSym/s 64QAM Upstream 4 3 35.40 MHz 48.50 dBmV DOCSIS1.x (TDMA) 2560 kSym/s 16QAM |
|
mustang50 Premium Member join:2005-05-06 Roseville, MI
1 recommendation |
Re: Evidence of Upstream Channel Bonding - Post Heresaid by Finally : UCID Freq Power Channel Type Symbol Rate Modulation Upstream 1 2 23.70 MHz 49.50 dBmV DOCSIS2.0 (ATDMA) 5120 kSym/s 64QAM Upstream 3 1 30.60 MHz 49.50 dBmV DOCSIS2.0 (ATDMA) 5120 kSym/s 64QAM Upstream 4 3 35.40 MHz 48.50 dBmV DOCSIS1.x (TDMA) 2560 kSym/s 16QAM OK, that proves you got it...BUT where? |
|
SunnyRuns from Clowns
join:2001-08-19 |
to Finally
I agree with mustang50. What's the point of copy/pasting something like that into this thread if you're not going to tell us where you are located? |
|
|
Finally
Anon
2012-Feb-23 10:16 pm
Sorry about that! I was mobile and it didn't let me type anything else...
In South Sacramento, CA!
Will check another house on a different node to see if their area got hit too
Speeds are 45/5 on Blast right now. |
|
SunnyRuns from Clowns
join:2001-08-19 |
Sunny
2012-Feb-23 10:19 pm
Thank you. Your report has been added to the first post in this topic. |
|
Sunny |
to Finally
(topic move) Does the TM702g eMTA support 4 bonded channels up?Moderator ActionThe post that was here, has been moved to a new topic .. » Does the TM702g eMTA support 4 bonded channels up? |
actions · 2012-Feb-23 11:52 pm · (locked) |
1 edit |
to Johkal
Chico, CA |
|
3 edits |
to Johkal
Sacramento, CAMine got enabled! Upstream UCID Freq Power Channel Type Symbol Rate Modulation Upstream 1 4 30.60 MHz 46.00 dBmV DOCSIS2.0 (ATDMA) 5120 kSym/s 64QAM Upstream 3 5 37.00 MHz 44.50 dBmV DOCSIS2.0 (ATDMA) 5120 kSym/s 64QAM Upstream 4 6 25.30 MHz 44.50 dBmV DOCSIS1.x (TDMA) 2560 kSym/s 16QAM Mod Note: After seeing 67845017 's post below, I checked previous posts by you. Based on info in one of those, I will assume Sacramento is close to your location unless you let me know otherwise. See also a previous report for Sacramento here ---> » South Sacramento, CASee a later report here ---> » Sacramento, CA ~sorto |
|
|
Re: Evidence of Upstream Channel Bonding - Post Here^^ where at ?? |
|
2 edits |
Beachwood, NJComcast did some 'network upgrades" on the 22nd. When the modem rebooted, upstream bonding occurred. 1) New Jersey 2) Beachwood 3) image shown above |
|
67845017 (banned) join:2000-12-17 Naperville, IL |
to redbeard916
Re: Evidence of Upstream Channel Bonding - Post HereHe's apparently in the Sacramento area. |
|
|
Tobin join:2003-09-21 Burlingame, CA 1 edit |
to Johkal
Hillsborough/San Mateo, CAHillsborough/San Mateo, CA |
|
pokesphIt Is Almost Fast Premium Member join:2001-06-25 Sacramento, CA 2 edits |
to Johkal
Sacramento, CAjust had an outage and when I rebooted up the modem, we had upstream channel bonding! BEST OUTAGE EVER!
Mod Note: See previous reports for Sacramento ---> » Sacramento, CA |
|
|
sweet! congrats and glad to see ya with lovely upstream bonding! |
|
(Software) pfSense Ubiquiti UniFi UAP-AC-PRO
1 edit |
to Johkal
Aurora, COI got a new upstream channel tonight. I've had 2, but my modem rebooted on its own and now I have 3. From 80016 area code, Aurora, CO. |
|
1 edit |
to Johkal
New Boston, NH New Boston, NH |
Rebooted my modem this morning, and noticed upstream bonding for the first time. (New Boston, NH) Speedtests afterwards seem to show some change in my download speeds. Have Extreme 50 - always go about 62mpbs prior to today. Best I've seen today is about 52mbps using closest speedtest.comcast.net server (Boston). Will watch / see if that changes at all. |
|
PhoneBoyGoogle "No Agenda" join:2002-01-02 Gig Harbor, WA 1 edit |
to Johkal
Gig Harbor, WAWe're bonding in Gig Harbor, WA |
|