dslreports logo
 
    All Forums Hot Topics Gallery
spc
Search similar:


uniqs
108301
Expand your moderator at work
ronus
join:2003-02-09
Dallas, GA

1 edit

ronus to Johkal

Member

to Johkal

Dallas, GA

Click for full size
Dallas, GA
russgold
join:2012-06-08

1 edit

russgold to Johkal

Member

to Johkal

Houston, TX

Click for full size
Houston, TX
jford951
join:2009-02-10
Westland, MI

1 edit

jford951

Member

Re: Westland, MI

Modem did a reboot last night and now I have lost my upstream bonding

It's back now must have been soemthing they were doing
posthaste
join:2001-05-20
Champaign, IL

1 edit

posthaste to Johkal

Member

to Johkal

Champaign, IL


Champaign, IL

PGHammer
join:2003-06-09
Accokeek, MD

2 edits

PGHammer to Johkal

Member

to Johkal

Accokeek, MD

Click for full size
Screencap of downstream and upstream status page
ARRIS WBM-760A finally shows all-green in southern Prince George's County, MD (yes - Accokeek, MD - 20607). I already had four-channel downstream - I now have three-channel upstream (two-channel D2 ATDMA and one DOCSIS 1.x TDMA - likely CMTS issues) as well. Given that I have Performance (not Blast or Ultra) I refuse to quibble.

EG
The wings of love
Premium Member
join:2006-11-18
Union, NJ

1 recommendation

EG

Premium Member

said by PGHammer:

I now have three-channel upstream (two-channel D2 ATDMA and one DOCSIS 1.x TDMA - likely CMTS issues) as well.

That's not an issue. Dissimilar carriers can be bonded.
Expand your moderator at work

Trips
join:2002-06-14
Augusta, GA

3 edits

Trips to Johkal

Member

to Johkal

Augusta, GA




I received my Zoom 5341J from Amazon today and I now have two upstream channels. The "H" version I was using previously, never showed more than one upstream channel.

SpottedCat
join:2004-06-27
Miami, FL

SpottedCat to Johkal

Member

to Johkal

Southwest Miami-Dade County, FL (unincorporated)

SW Miami-Dade county, FL. (33175)
Comcast Business 16/2

I was visiting a friend today who had just moved into a new house, and we did a speed test on his new Comcast connection, and he got about 18 megabits up. This meant obvious upstream channel bonding, so I had to test my own, living only a 20 minute drive away.

After a modem reboot, I now have it too! This makes me very happy. I hope it sticks around; I like knowing that my uploads are less likely to be affected by node congestion.

damaged
ipv6, but the doctor says I'll be fine.
join:2000-12-25
Hallandale, FL
ARRIS BGW210-700
(Software) pfSense

1 edit

damaged to Johkal

Member

to Johkal

Hallandale, FL

Click for full size
Hallandale, FL

JimThePCGuy
Formerly known as schja01.
MVM
join:2000-04-27
Morton Grove, IL

JimThePCGuy to Johkal

MVM

to Johkal

Morton Grove, IL

Click for full size
Morton Grove
Illinois

doczenith1
join:2001-03-07
Michigan
Asus RT-AC86

doczenith1 to Johkal

Member

to Johkal

Lansing, MI

Upstream bonding for about 3 weeks now.
azstu
join:2007-05-13
Tucson, AZ

azstu

Member

Re: Tucson, AZ

Click for full size
After new cable run installed

Sunny
Runs from Clowns

join:2001-08-19

Sunny

(topic move) Question for aztu

Moderator Action
The post that was here, has been moved to a new topic .. »[Signals] Question for azstu

newview
Ex .. Ex .. Exactly
Premium Member
join:2001-10-01
Parsonsburg, MD

1 edit

newview to Johkal

Premium Member

to Johkal

Parsonsburg, MD

Click for full size
Probably Salisbury, MD as well since Parsonsburg is a rural node off of Salisbury.
CplEstesUSMC
join:2005-02-16
Douglasville, GA

CplEstesUSMC to Johkal

Member

to Johkal

Douglasville, Ga

Click for full size
2 64QAM Channels
Douglasville, Ga

Looks like Comcast is just sticking their toe in the upstream channel bonding pool. I have two 64-qam channels on the upload. Speedtest around 6 megs.
Tomcat353
join:2002-12-27
Jacksonville, FL

1 recommendation

Tomcat353 to Johkal

Member

to Johkal

Re: Evidence of Upstream Channel Bonding - Post Here

»lh4.googleusercontent.co ··· ream.JPG

Screenshot showing 2 Upstream channels. Modem is a Zoom 5341J.

City: Jacksonville
State: Florida

pclover
join:2008-08-02
Santa Cruz, CA

1 edit

1 recommendation

pclover to Johkal

Member

to Johkal

Santa Cruz, CA update

Update of the original post.

4 Downstream channels came to my area. This may be of use to other people.

ThurstonX
join:2003-11-22
Locust Grove, VA

1 edit

ThurstonX to Johkal

Member

to Johkal

Locust Grove, VA

Click for full size
Locust Grove, VA 22508

Just replaced my old Motorola SB5120 with an SB6121. FWIW, both the Receive and Send lights are solid blue. At first boot they were solid Green, but after calling to activate it, and a new config file pushed, if I read the log correctly, they went blue.

Chris 313
Because It's Geekier
Premium Member
join:2004-07-18
Houma, LA
·AT&T FTTP
·Comcast XFINITY

1 recommendation

Chris 313

Premium Member

Yes, you have both Downstream and Upstream bonding. That's why 2 blue lights. If you have a Gigabit router plugged in, I believe the link light will also be blue.

While there is nothing wrong with your modem, I see you have 8 channels now. But your modem is only 4x4. You might wanna see if you can return your 6121 for one of these: »www.amazon.com/Zoom-DOCS ··· e+modems

This model is 8x4 and is even more stable and faster then the Motorola 6121.

The choice is yours. Enjoy regardless.

(If you buy at someplace like best buy, make sure it's the J version of the Zoom modem. If not, it's the same as your 6121)

gdio53
join:2000-07-30
Feeding Hills, MA

1 edit

gdio53 to Johkal

Member

to Johkal

Agawam, MA

Click for full size
Agawam, MA

Just rebooted and got 2nd upstream channel.

Subscribe to Blast.

nhhcs
join:2005-07-29
Contoocook, NH

1 edit

nhhcs to Johkal

Member

to Johkal

Hopkinton, NH

Click for full size
Hopkinton, NH - (just outside Concord, NH)

Tried a reboot after seeing post above from Agawam, MA. Sure enough now have 2 channels up!

Sunny
Runs from Clowns

join:2001-08-19

Sunny

(topic move) Upstream channel bonding (firmware question)

Moderator Action
The post that was here, has been moved to a new topic .. »Upstream channel bonding (firmware question)
Ewong63112
join:2002-01-26
Quincy, MA

Ewong63112 to Johkal

Member

to Johkal

Quincy, MA

Click for full size
Funny.. I was wondering why my internet connection was dropping and my upstream was 54db+ for the past 2 weeks. This explains it all if they're upgrading but it would've been nice to know
dakewe
join:2010-07-12
Mckeesport, PA

1 edit

dakewe to Johkal

Member

to Johkal

McKeesport, PA

Click for full size
McKeesport, PA (Pittsburgh)

PeteC2
Got Mouse?
MVM
join:2002-01-20
Bristol, CT

1 edit

PeteC2 to Johkal

MVM

to Johkal

Bristol, CT

Bristol, CT

StatusStatus HW/FW Versions Event Log CM State Advanced RF Parameters

Downstream
DCID Freq Power SNR Modulation Octets Correcteds Uncorrectables
Downstream 1 71 741.00 MHz -1.84 dBmV 38.26 dB 256QAM 25516895 319 899
Downstream 2 69 729.00 MHz -1.33 dBmV 38.26 dB 256QAM 12397207 434 824
Downstream 3 70 735.00 MHz -1.47 dBmV 38.26 dB 256QAM 12707413 173 1043
Downstream 4 72 747.00 MHz -1.86 dBmV 38.26 dB 256QAM 12437431 350 997
Reset FEC Counters

Upstream
UCID Freq Power Channel Type Symbol Rate Modulation
Upstream 1 1 30.00 MHz 46.00 dBmV DOCSIS2.0 (ATDMA) 5120 kSym/s 64QAM
Upstream 4 2 23.60 MHz 46.00 dBmV DOCSIS2.0 (ATDMA) 5120 kSym/s 64QAM

Status
System Uptime: 0 d: 15 h: 12 m
Computers Detected: staticCPE(1), dynamicCPE(1)
CM Status: Telephony-Reg Complete
Time and Date: Mon 2012-07-23 05:27:52

Interface Parameters
Interface Name Provisioned State Speed (Mbps) MAC address
LAN Enabled Up 1000(Full) 00:1D:CF:7A:05:30
CABLE Enabled Up ----- 00:1D:CF:7A:05:31
MTA Pass Up ----- 00:1D:CF:7A:05:32

© Copyright 2012, ARRIS Group, Inc., All rights reserved.

gdio53
join:2000-07-30
Feeding Hills, MA

1 edit

gdio53 to Johkal

Member

to Johkal

Agawam, MA

Click for full size
Agawam, MA

Went to 2 upstream channels on 7/18 »Agawam, MA. Saw lots of uncorrectables and errors in the log today, rebooted and back to 1!

Errors include: RCS Partial Service, SYNC Timing Synchronization failure - Loss of Sync, Lost MDD Timeout and MDD IP mode Override Mode=0.

Last time errors showed up in the log was when I got the 2 upstream channels.

On Blast and still have the new speeds.
NyteRazor
join:2009-02-02
Hammond, IN

1 edit

NyteRazor to Johkal

Member

to Johkal

Hammond, IN

Click for full size
Upload streams changed from 2 to 3. Using Zoom 5341J cable modem.
bgoodbody
Bill G
join:2002-05-08
North Truro, MA
Netgear WNR3500L

1 edit

bgoodbody to Johkal

Member

to Johkal

North Truro, MA

Click for full size
UpStream Bonding Evidence
Turned on last night on Cape Cod. Using Arris eMTA TM722G