 MxxCon
join:1999-11-19
Brooklyn, NY | reply to aefstoggaflm
Re: [modem/router] How to access 6100G's interface while connect SK firmware is pretty much a stock netgear firmware with an extra menu to enable/disable reporting module and enable/disable bridge mode.
assigning 2nd IP to my tomato's wan port isn't going to help here since SK is sitting in front of it.
--
Check out my awesome city of MxxTopia »mxxtopia.myminicity.com/ind or »mxxtopia.myminicity.com (the more people visit, the bigger it is) |
|
 aefstoggaflmOpen Source FanPremium
join:2002-03-04
Bethlehem, PA
kudos:2
 ·Verizon Online DSL
| said by MxxCon:SK firmware is pretty much a stock netgear firmware with an extra menu to enable/disable reporting module and enable/disable bridge mode.
assigning 2nd IP to my tomato's wan port isn't going to help here since SK is sitting in front of it.
Ok.
I have tapped on wayjac  , to help out if he/she can..
--
Please use the "yellow (IM) envelope" to contact me and please leave the URL intact. |
|
 wayjacPremium,MVM
join:2001-12-22
Indy | reply to MxxCon
Since the netgear uses 192.168.1.1 as it's ip address
The westell needs it's ip address changed to 192.168.1.253
After that is done
Connect the netgear internet port to a netgear lan port
Connect the westell ethernet port to a netgear lan port |
|
|
|
MxxCon
join:1999-11-19
Brooklyn, NY | then how will netgear pppoe? |
|
wayjacPremium,MVM
join:2001-12-22
Indy | The netgear internet port and the westell ethernet port will find each other and allow the pppoe to work |
|
aefstoggaflmOpen Source FanPremium
join:2002-03-04
Bethlehem, PA
kudos:2 Reviews:
·Verizon Online DSL
| said by wayjac:The netgear internet port and the westell ethernet port will find each other and allow the pppoe to work
While I know how to get into my Westell: If I followed your directions, would a Public Static IP work too?
Router config(s), right now..
a) Westell 6100F (with only one LAN port) at 192.168.1.1 (in bridge mode).
b) Linksys WRT54G running tomato firmware at 192.168.0.1
Thanks.
--
Please use the "yellow (IM) envelope" to contact me and please leave the URL intact. |
|
 Jodokast96Stupid people really piss me off.Premium
join:2005-11-23
Erial, NJ
kudos:2 | reply to wayjac
An earlier thread on this method.
»Get Modem Stats while Hooked Up to Router? |
|
wayjacPremium,MVM
join:2001-12-22
Indy | reply to aefstoggaflm
What I posted is only for dsl that uses pppoe
The number of ethernet ports on the modem does not matter
The modem and router must have unique ip's that are in the same subnet |
|
aefstoggaflmOpen Source FanPremium
join:2002-03-04
Bethlehem, PA
kudos:2 Reviews:
·Verizon Online DSL
| said by wayjac:What I posted is only for dsl that uses pppoe
Ok.
Why only for PPPoE (Not for DHCP or Static Public IP) ?
Can you go more techical about how that works ?
Thanks.
--
Please use the "yellow (IM) envelope" to contact me and please leave the URL intact. |
|
wayjacPremium,MVM
join:2001-12-22
Indy | Because pppoe traffic cannot mingle with tcp/ip and dhcp traffic |
|
