| Using A Buffalo WHR-HP-G300N as an Access Point? Our office is on Comcast Business class with a SMC router/modem. It gives DHCP and I am using the standard 10.1.10.x/24 subnet for PC web traffic. Works fine.
I have a Buffalo G300N that I would like to use as an AP since the Comcast device does not have wireless. I connected the WAN port to the Comcast and it gets DHCP. I set the Buffalo to ‘Router’ mode and it is itself giving DHCP to the wireless subnet of 192.168.11.x/24 but the wireless devices cannot get on the Internet.
Any other settings I need to do to get this to work? We could get a layer 2 AP device as we have in another location but I’d like to get this to work if possible. |
|
LLigetfa
join:2006-05-15
Fort Frances, ON
kudos:1 | Have you tried RTFM?
quote:
Router Switch
Switches router mode between enabled, disabled, and auto.
On: Router is enabled (router mode).
Off: Router is disabled (bridge/AP mode).
Auto: This switches between modes automatically based on whether or not another router is detected on the Internet port. The default setting for this switch is Auto.
--
Strange as it seems, no amount of learning can cure stupidity, and formal education positively fortifies it. -- Stephen Vizinczey |
|
