1 edit | [Problem]Belkin N1 Vision: disconnects on a 2-hour intereval Log in your Router
1) In the Text box type PS then click enter
PID Uid VmSize Stat Command
292 root 328 S /usr/sbin/ntp -z GMT-8:0:1 -h xxx.xx.xxx.xx -b xxx.xx
For me I use kill 292. Is never going to be the same when you have to do it again. So if you restart router make sure to do this setup.
2) Look for PID on top and that is the column you are going to use for the number (Kill number).
3) Look at the column of Command and scroll down till you see GMT
4) Then look for in that same row to your left for the number that is on the PID column.
5) Use that number to type in the box (Kill number), (replace the word number with the PID Number you see).
6) Then press Enter. You are done...
Note: Don't press Apply changes because it will reset the router and all you did will be lost. After you are done close the windows or log off. |
|
 sashwaPixie Cat Crunchin' n Foldin'Premium,Mod
join:2001-01-29
Alcatraz
kudos:14 | (topic move) How can i access the CLI of the belkin N1 vision roModerator Action
The post that was here, has been moved to a new topic .. »How can i access the CLI of the belkin N1 vision router? |
|
