dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
uniqs
2190
share rss forum feed


ralphus

@sbcglobal.net

Did I end up with an ATM-only 2701HGV-B?

I have U-Verse ADSL2+ and was trying to get away from my 2210-02, the worst modem I've ever used, and bought a cheap 2701HGV-B on eBay. It won't sync and it appears it's one of the unlabeled ATM-only 2701s. I'm posting some information from the router in order to confirm this...

Hardware Version: 2700-100690-007
Software Version: 5.29.137.2
DSL Modem: 7.2.7

INF P0000-00-00T00:00:01 wave: Atheros driver version: 2.0.0
INF P0000-00-00T00:00:06 scc: SCC DMA started
INF P0000-00-00T00:00:09 initd: ---------------------------------------------
INF P0000-00-00T00:00:10 cm: Starting plugpull recovery on voicedev
INF P0000-00-00T00:00:10 cm: Plugpull removing /disk/cm/voicedev.007
INF P0000-00-00T00:00:10 cm: Plugpull recovery complete
INF P0000-00-00T00:00:11 cm: cm initialized
INF P0000-00-00T00:00:11 initd: libcm started
INF P0000-00-00T00:00:11 ulib: System clock initialized to Wed Aug 18 12:10:58 2010
INF P0000-00-00T00:00:11 ulib: Board serial number: 251010002054
INF P0000-00-00T00:00:11 ulib: Board product name: 2701HGV-B Gateway
INF P0000-00-00T00:00:11 ulib: Device:eth1 is not available
INF P0000-00-00T00:00:11 ulib: Device:hpna0 is not available
INF P0000-00-00T00:00:11 ulib: Device:usbd0 is not available
INF P0000-00-00T00:00:11 ulib: Device:moca0 is not available
INF P0000-00-00T00:00:11 ulib: Device:moca1 is not available
INF P0000-00-00T00:00:11 ulib: Device:eth2 is not available
INF P0000-00-00T00:00:11 ulib: ulib initialized
INF P0000-00-00T00:00:11 initd: libulib started
INF P0000-00-00T00:00:11 initd: starting runlevel: 3 => 7
INF P0000-00-00T00:00:11 initd: libmif start
INF P0000-00-00T00:00:11 initd: starting runlevel: 4 => 7
INF P0000-00-00T00:00:11 initd: mifd start pid:13
INF P0000-00-00T00:00:11 initd: pkg start pid:14
INF P0000-00-00T00:00:12 pkg: extracted system/system
INF P0000-00-00T00:00:20 pkg: extracted ui/base_ui
INF P0000-00-00T00:00:24 pkg: extracted lang/common_en
INF P0000-00-00T00:00:24 pkg: extracted providerlang/att-ipdslam_en
INF P0000-00-00T00:00:26 pkg: extracted providerui/att-ipdslam
INF P0000-00-00T00:00:26 pkg: extracted logo/att-ipdslam_logo
INF P0000-00-00T00:00:26 pkg: extracted voice/base_voice
INF P0000-00-00T00:00:26 pkg: note: voice/base_voice has no uninstall script
INF P0000-00-00T00:00:40 pkg: extracted config/att-ipdslam.production_config
INF P0000-00-00T00:00:40 pkg: note: config/att-ipdslam.production_config has no uninstall script
INF P0000-00-00T00:00:40 initd: pkgc start
INF P0000-00-00T00:00:40 initd: login start pid:136
INF P0000-00-00T00:00:40 pki: pki initialized
INF P0000-00-00T00:00:40 initd: pki start
INF P0000-00-00T00:00:40 initd: syslogd start pid:138
INF P0000-00-00T00:00:40 initd: starting runlevel: 5 => 7
INF P0000-00-00T00:00:40 initd: lmd start pid:140
INF P0000-00-00T00:00:40 initd: starting runlevel: 6 => 7
INF P0000-00-00T00:00:40 initd: nodesd start pid:141
INF P0000-00-00T00:00:40 initd: dhcpd start pid:142
INF P0000-00-00T00:00:40 initd: named start pid:143
INF P0000-00-00T00:00:40 nodesd: process[141] started
INF P0000-00-00T00:00:40 named: domainname: gateway.2wire.net
INF P0000-00-00T00:00:40 named: hostname: homeportal.gateway.2wire.net
INF P0000-00-00T00:00:40 initd: starting runlevel: 7 => 7
INF P0000-00-00T00:00:40 lmd: device0: dsl0 has no current version set
INF P0000-00-00T00:00:40 initd: pkgc start
INF P0000-00-00T00:00:40 initd: rfsd start pid:145
INF P0000-00-00T00:00:40 initd: httpd start pid:146
INF P0000-00-00T00:00:40 initd: hostapd start pid:147
INF P0000-00-00T00:00:40 httpd: process[146] started
INF P0000-00-00T00:00:40 initd: voiced start pid:148
INF P0000-00-00T00:00:40 initd: System boot to runlevel 7 complete
WRN P0000-00-00T00:00:40 lmd: device0: device config sync not-completed
INF P0000-00-00T00:00:41 ulib: Wireless ESSID set to 2WIRE054
INF P0000-00-00T00:00:41 ulib: Wireless authentication set to WPA-PSK
INF P0000-00-00T00:00:41 ulib: Wireless encryption set to TKIP
INF P0000-00-00T00:00:41 ulib: Wireless channel set to 0
INF P0000-00-00T00:00:41 ulib: Wireless power set to 400
INF P0000-00-00T00:00:41 httpd: init module (hurl)
INF P0000-00-00T00:00:41 httpd: init module (xslt)
INF P0000-00-00T00:00:41 httpd: init module (rewrite)
INF P0000-00-00T00:00:41 httpd: init module (file)
INF P0000-00-00T00:00:41 httpd: init module (soap)
INF P0000-00-00T00:00:41 vr: Voice router started
INF P0000-00-00T00:00:41 voiced: Voice Service enabled
INF P0000-00-00T00:00:41 sip: SipProtocolStart() - SIP protocol starts
WRN P0000-00-00T00:00:42 lmd: qos0: unable to lookup clfy netdev ethatm0: No such file or directory
WRN P0000-00-00T00:00:42 lmd: Previous log entry repeated 7 times
INF P0000-00-00T00:00:42 vrsip: port 0: voice on broadband 21
INF P0000-00-00T00:00:42 lmd: qos0: added queue 0 params (dev:dsl0, qid:0, weight:40, depthb:0, depthp:0, rate:96000, burst:16000)
INF P0000-00-00T00:00:42 lmd: qos0: added queue 1 params (dev:dsl0, qid:1, weight:10, depthb:0, depthp:0, rate:16000, burst:16000)
INF P0000-00-00T00:00:42 lmd: qos0: added queue 2 params (dev:dsl0, qid:2, weight:10, depthb:0, depthp:0, rate:16000, burst:16000)
INF P0000-00-00T00:00:42 lmd: qos0: added queue 3 params (dev:dsl0, qid:3, weight:40, depthb:0, depthp:0, rate:32000, burst:16000)
INF P0000-00-00T00:00:42 lmd: qos0: added queue 4 params (dev:dsl0, qid:4, weight:10, depthb:0, depthp:0, rate:16000, burst:16000)
INF P0000-00-00T00:00:42 lmd: qos0: added queue 5 params (dev:dsl0, qid:5, weight:10, depthb:0, depthp:0, rate:16000, burst:16000)
INF P0000-00-00T00:00:42 lmd: qos0: added queue 6 params (dev:dsl0, qid:6, weight:10, depthb:0, depthp:0, rate:16000, burst:16000)
INF P0000-00-00T00:00:42 lmd: qos0: added queue 7 params (dev:dsl0, qid:7, weight:20, depthb:0, depthp:0, rate:16000, burst:16000)
INF P0000-00-00T00:00:42 lmd: qos0: added queue 8 params (dev:dsl0, qid:8, weight:20, depthb:0, depthp:0, rate:96000, burst:16000)
INF P0000-00-00T00:00:42 httpd: vhost home0:0 listening on 0.0.0.0 port: 80
INF P0000-00-00T00:00:42 vrsip: port 1: voice on broadband 21
INF P0000-00-00T00:00:42 lmd: ipnet1: UP on bridge0 with 192.168.1.254/24
INF P0000-00-00T00:00:42 atm: port(58,0) attached to mad0
WRN P0000-00-00T00:00:42 lmd: device0: device config sync not-completed
WRN P0000-00-00T00:00:42 lmd: qos0: admin_gen: unable to lookup clfy netdev ethatm0: No such file or directory
WRN P0000-00-00T00:00:42 lmd: Previous log entry repeated 7 times
WRN P0000-00-00T00:00:42 lmd: device0: device config sync not-completed
INF P0000-00-00T00:00:42 voiced: traffic shaping, update uprate to 1500
WRN P0000-00-00T00:00:42 lmd: qos0: admin_gen: unable to lookup clfy netdev ethatm0: No such file or directory
WRN P0000-00-00T00:00:43 lmd: Previous log entry repeated 15 times
WRN P0000-00-00T00:00:43 lmd: device0: device config sync not-completed
WRN P0000-00-00T00:00:43 lmd: qos0: admin_gen: unable to lookup clfy netdev ethatm0: No such file or directory
WRN P0000-00-00T00:00:43 lmd: Previous log entry repeated 7 times
INF P0000-00-00T00:00:43 lmd: device0: dsl0 has no current version set
WRN P0000-00-00T00:00:43 lmd: qos0: admin_gen: unable to lookup clfy netdev ethatm0: No such file or directory
WRN P0000-00-00T00:00:43 lmd: Previous log entry repeated 15 times
INF P0000-00-00T00:00:44 vr: Hybrid_EC(0x43c12244): flags setting: f
INF P0000-00-00T00:00:44 intpot: Failover state on port 0 changing from 0 to 2
INF P0000-00-00T00:00:45 vr: Hybrid_EC(0x43c15ca8): flags setting: f
INF P0000-00-00T00:00:45 ulib: Node 0 Added mac:00:1f:d0:d7:cd:ed
INF P0000-00-00T00:00:45 intpot: Failover state on port 1 changing from 0 to 2
INF P0000-00-00T00:00:46 lmd: device0: dsl0 has no current version set
WRN P0000-00-00T00:00:46 lmd: qos0: admin_gen: unable to lookup clfy netdev ethatm0: No such file or directory
WRN P0000-00-00T00:00:47 lmd: Previous log entry repeated 15 times
INF P0000-00-00T00:00:47 lmd: device0: dsl0 has no current version set
WRN P0000-00-00T00:00:48 lmd: qos0: admin_gen: unable to lookup clfy netdev ethatm0: No such file or directory
WRN P0000-00-00T00:00:48 lmd: Previous log entry repeated 15 times
INF P0000-00-00T00:00:48 httpd: vhost home0:2 listening on 0.0.0.0 port: 443
INF P0000-00-00T00:00:48 httpd: vhost home0:1 listening on 127.0.0.1 port: 80
INF P0000-00-00T00:00:48 httpd: vhost home0:0 down on 0.0.0.0 port: 80
INF P0000-00-00T00:00:48 httpd: vhost home0:2 down on 0.0.0.0 port: 443
INF P0000-00-00T00:00:48 httpd: vhost home0:0 listening on 192.168.1.254 port: 80
INF P0000-00-00T00:00:50 named: listen on address[0]: 192.168.1.254
INF P0000-00-00T00:00:54 httpd: vhost home0:2 listening on 192.168.1.254 port: 443
WRN P0000-00-00T00:01:54 lmd: qos0: admin_gen: unable to lookup clfy netdev ethatm0: No such file or directory
WRN P0000-00-00T00:01:54 lmd: Previous log entry repeated 15 times
INF P0000-00-00T00:01:54 atm: port(58,0) attached to mad0
INF P0000-00-00T00:02:00 system: memfs: compression completed

Is there any way I can avoid an ATM-only model if I attempt to get a working HGV-B? I know it's garbage, but my only alternative is the equally-bad-or-worse 2210-02.



wayjac
Premium,MVM
join:2001-12-22
Indy
kudos:1

Have a look at this thread
»How to change equipment on IP-DSLAM HSI?



ralphus

@sbcglobal.net

Great, I can't find that firmware update though... Having it pushed is obviously out of the question since I can't sync. Where can I download the firmware that will allow my 2701 to sync?



ILpt4U
Premium
join:2006-11-12
Lisle, IL
kudos:9

Were you able to find the firmware?



ralphus

@sbcglobal.net

Yep, I'll report back on my success/failure.


farren

join:2004-04-20
Little Rock, AR

Worked perfectly! Thanks all! (same user as above--not sure how I ended up posting anonymous here while posting logged in on the U-Verse forum)