dslreports logo
 
    All Forums Hot Topics Gallery
spc
uniqs
39

wayjac
MVM
join:2001-12-22
Indy

wayjac to Legit1235

MVM

to Legit1235

Re: How do you change 2Wire IP Address?

Software version 5.x instructions
Go to this 2wire url
192.168.1.254/xslt?PAGE=C06
Click the configure manually option
Enter the desired ip address in the router address field
Enter the desired subnet mask in the subnet mask field
Select the enable dhcp option enter the desired dhcp range/pool
Click the save button

Software version 6.x instructions
Go to this 2wire url
192.168.1.254/xslt?PAGE=C_2_3
Click the configure manually option
Enter the desired ip address in the router address field
Enter the desired subnet mask in the subnet mask field
Select the enable dhcp option enter the desired dhcp range/pool
Click the save button

Legit1235
@sbcglobal.net

Legit1235

Anon

said by wayjac:

Software version 5.x instructions
Go to this 2wire url
192.168.1.254/xslt?PAGE=C06
Click the configure manually option
Enter the desired ip address in the router address field
Enter the desired subnet mask in the subnet mask field
Select the enable dhcp option enter the desired dhcp range/pool
Click the save button

Software version 6.x instructions
Go to this 2wire url
192.168.1.254/xslt?PAGE=C_2_3
Click the configure manually option
Enter the desired ip address in the router address field
Enter the desired subnet mask in the subnet mask field
Select the enable dhcp option enter the desired dhcp range/pool
Click the save button

When i try that heres what comes up "Warning Modifying the settings on this page can impact the ability of devices to access your private network." can you do it over Remote Control Software like Teamviewer ? Please?
bbear2
Premium Member
join:2003-10-06
dot.earth

bbear2

Premium Member

Just remember what you changed it to and address your router with that new IP hence forth. Nothing bad can happen and if you decide you don't like it, change it back or select the default again.

wayjac
MVM
join:2001-12-22
Indy

wayjac to Legit1235

MVM

to Legit1235
said by Legit1235 :

When i try that heres what comes up "Warning Modifying the settings on this page can impact the ability of devices to access your private network."

There is a warning like that on every configuration page that has options that can effect lan or internet connections