dslreports logo
site
 
    All Forums Hot Topics Gallery
spc

spacer




how-to block ads


Search Topic:
share rss forum feed


zacron
Premium
join:2008-11-26
canada
reply to routermonkey

Re: Cisco Configuration Help - If possible

Hello, just wondering if you can give me a list of the commands I need to enter before using the list you gave me before?

I keep getting "invalid at ^" errors and it's not making sense to me... I've tried from "enable" and from "configure terminal"

THanks,

Zacron
--
"Don't be dense, use common sense"
»/im/95892602/3467.png


routermonkey

join:2003-06-29
Montreal, QC
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#vpdn enable
Router(config)#vpdn-group PPPoE-CLIENT
Router(config-vpdn)#request-dialin
Router(config-vpdn-req-in)#protocol pppoe
Router(config-vpdn-req-in)#exit
Router(config-vpdn)#ip pmtu
Router(config-vpdn)#exit
Router(config)#interface FastEthernet0/1
Router(config-if)#ip address 192.168.1.254 255.255.255.0
Router(config-if)#pppoe enable
Router(config-if)#pppoe-client dial-pool-number 1
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#interface Dialer1
Router(config-if)#mtu 1492
Router(config-if)#ip address negotiated
Router(config-if)#ip nat outside
Router(config-if)#encapsulation ppp
Router(config-if)#ip tcp adjust-mss 1452
Router(config-if)#dialer pool 1
Router(config-if)#no cdp enable
Router(config-if)#ppp authentication pap callin
Router(config-if)#ppp pap sent-username xxxx@yyyyy.com password you-wish
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#