| reply to TMBackstrom
Re: Speedstream 5667 - Need To Change Back To Router Mode And this is what I get doing a HELP ALL through the Console:
----------------------------------------------------------------
192.168.254.254> help all
Commands are:
atm [] - send command to atm process
bridge [] - send command to bridge process
bsp [] - send command to bsp process
buffer [] - send command to buffer process
bun [] - send command to bun process
chips [] - send command to chips process
config [] - send command to config process
defaultroute - set/clear default route
edd [] - send command to edd process
ethernet [] - send command to ethernet process
event help|next|previous|recent|show|unshow - control display of events
flashfs [] - send command to flashfs process
ip [] - send command to ip process
isfs [] - send command to isfs process
led [] - send command to led process
loaddefault - syntax> loaddefault bridge
Except to password, all the configuration will be restored as
factory default settings when you execute this command.
oam [] - send command to oam process
oamcli [] - send command to oamcli process
portcli [] - send command to portcli process
reboot - Restart system. Any logins over telnet will be
closed.
reflect [] - send command to reflect process
restart - restart system
set - set
Configures various parameters
set dsl restart - cycle the DSL interface through a reset sequence
set dsl disconnect - disable the DSL interface
show - show
Displays general information
show conn - display the PVC information
show dslstats - display statistics of the DSL ATUs
snmp [] - send command to snmp process
tftp [] - send command to tftp process
upgradekey - Upgrade the firmware of modem
Commands :
upgradekey read - Read the upgrade key from modem
upgradekey write - Write the upgrade key to modem
uptime - show time system has been running
version - show system software version
vvb [] - send command to vvb process
xmodem - Download firmware through Xmodem
Commands :
xmodem - Normal upgrade speed ( 9600 baud rate )
xmodem fast - Fast upgrade speed ( 38400 baud rate )
192.168.254.254>
----------------------------------------------------------------
I did try a LOADDEFAULT ROUTER but it told me, "You cann't use this command under bridge mode". |
