|reply to kuhnnl |
Re: Zyxel NBG-416N firmware recovery
The recovery is work, i just tried because the router is dead after doing firmware upgrade, the tricky is you need to execute the tftp command in short time after the router startup (get the conmand line ready, once the lan is up then press 'enter'
I have the same issue -- router bricked after applying the firmware upgrade. Following the above instrux to the letter, setting up the LAN, resetting the brick, I am not able to connect to the router via tftp. tftp consistently returns with a timeout. I have ordered a new router, a CISCO. I can't recall being this annoyed with hardware before.