JGMACK
join:2002-04-20
Hollywood, FL | [OC] Overclocking P4 3.2 I have been attempting to overclock a P4 3.2 Northwood 478 socket CPU installed in a Biostar P4M80-M4 MB. Even with a very small increase in clock speed and or voltage, it goes into a reboot loop. Any ideas? |
|
 Anonymous_AnonymousPremium
join:2004-06-21
127.0.0.1
kudos:2
 ·RoadRunner Cable
| said by JGMACK:I have been attempting to overclock a P4 3.2 Northwood 478 socket CPU installed in a Biostar P4M80-M4 MB. Even with a very small increase in clock speed and or voltage, it goes into a reboot loop. Any ideas?
VIA uses a unlocked PCI/AGP bus instead of a fixed PCI/AGP bus
this is why your getting reboot loops |
|
JGMACK
join:2002-04-20
Hollywood, FL | VIA uses a unlocked PCI/AGP bus instead of a fixed PCI/AGP bus
Can anything be done about this? |
|
Anonymous_AnonymousPremium
join:2004-06-21
127.0.0.1
kudos:2 | another motherboard |
|
| reply to JGMACK
said by JGMACK:VIA uses a unlocked PCI/AGP bus instead of a fixed PCI/AGP bus
Can anything be done about this?
Unless there is an option in your BIOS to lock the PCI/AGP bus speed to 100mhz, you are probably screwed. |
|
